Showing items 741 - 760 of 112,166 results.
Maintenance & Troubleshooting
Posted:
2 Jun 2025 08:03
by
andrew_k
If the pot is faulty you may get away with just replacing it without calibration, you can get the software...
Maintenance & Troubleshooting
Posted:
2 Jun 2025 05:08
by
lifter01
You need to plug in a laptop with LSG installed so unfortunately you'll need yo get a linde tech to...
Maintenance & Troubleshooting
Posted:
1 Jun 2025 06:14
by
MatthieuBlondin
I have a 2008 Skytrak model 10054. The flashers or hazards stopped working but I have power at the switch....
Maintenance & Troubleshooting
Posted:
1 Jun 2025 02:29
by
Justaguy75
It's a older unit. Lift works fine just jeeps popping up these codes.
Maintenance & Troubleshooting
Posted:
1 Jun 2025 02:05
by
mwjago
Not sure if that harness would work in a 1F4 model. I only encountered that issue in the 1F2 models....
Maintenance & Troubleshooting
Posted:
31 May 2025 22:50
by
Scott_
I my self have not seen that on a 3.0 motor but does the truck have a lot of hours...
Maintenance & Troubleshooting
Posted:
31 May 2025 14:05
by
swoop223
Mr Morris,
the keyswitch is a good guess but it could be more than that.
if you go to skyjack's...
Maintenance & Troubleshooting
Posted:
31 May 2025 09:46
by
Austin_Morris
Hello All, I have a skyjack SJlll3219 scissor lift that will not raise from platform. I have inspected all the...
Maintenance & Troubleshooting
Posted:
31 May 2025 01:54
by
Mr_C
I am troubleshooting a JLG 2032ES. It lifts fine but won't drive. There are no error codes at Platform Control...
Maintenance & Troubleshooting
Posted:
30 May 2025 23:52
by
Justaguy75
I have a.w1f4a45v with the td42 engine and am having p03 p07 codes which is ecm communication codes and...
Maintenance & Troubleshooting
Posted:
30 May 2025 23:37
by
Ryan_Stampe
The machine which I regularly use permanently has a "There are no active tests" message on the display. I've been...
Maintenance & Troubleshooting
Posted:
30 May 2025 05:44
by
Justaguy75
Where does this harness plug in at? Thanks. Also the lift I am working on is a mw1f4a45v with p03...
Maintenance & Troubleshooting
Posted:
30 May 2025 05:22
by
BusyE
I have an error E3159. Replaced the steer sensor but it still has the error. Everything functions except travel.
Any...
Maintenance & Troubleshooting
Posted:
30 May 2025 04:25
by
michel_v
button on the left under the steering wheel to move it one position down
Maintenance & Troubleshooting
Posted:
30 May 2025 03:34
by
kelsey
Did you get this resolved?
On that truck, anytime the key is on and the engine is not running you...
Maintenance & Troubleshooting
Posted:
30 May 2025 03:15
by
Stanley_Darland
We have this H50xm, with the 3.0 liter GM engine. We have replaced the PCV valve, the filter that connects...
Maintenance & Troubleshooting
Posted:
30 May 2025 02:06
by
DyslexicNerd_01
On the shorter end of the drive unit there is a case held in place by 4 bolts. Removed that...
Maintenance & Troubleshooting
Posted:
29 May 2025 22:53
by
BusyE
This is a late response........Changed the display and was able to get in with the password on hand. It had...
Maintenance & Troubleshooting
Posted:
29 May 2025 21:02
by
Richard_Irwin
Hi Nic,
Glad you got all sorted.
The technical support is there anytime you need it.
Maintenance & Troubleshooting
Posted:
29 May 2025 20:59
by
Nic_Olson
Issue solved, #11 fuse was blown and rear 90 degree proxy needed to be replaced
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.