Showing items 721 - 740 of 112,166 results.
Maintenance & Troubleshooting
Posted:
5 Jun 2025 23:29
by
John_Bradley
First if it is LP check lockoff valve make sure you have voltage to it as you turn over engine...
Maintenance & Troubleshooting
Posted:
5 Jun 2025 23:26
by
John_Bradley
Sounds as though an electronic relay sticking
Possibly an anti start relay
The relay keeps the starter from turning after...
Maintenance & Troubleshooting
Posted:
5 Jun 2025 23:22
by
John_Bradley
Check battery , if low voltage it will let starter turn then drop out Clark lifts do same thing when...
Safety & Training
Posted:
5 Jun 2025 23:14
by
Sean_Lee
If you're thinking of going self-employed as an MHE trainer, here's a quick roadmap:
Set up your business: Register as...
Maintenance & Troubleshooting
Posted:
5 Jun 2025 22:13
by
Postal112
I am looking for technical assistance regarding the removal of a driveshaft.
Maintenance & Troubleshooting
Posted:
5 Jun 2025 21:58
by
Randy_Redekop
Did you ever figure this out? Mine has the same problem.
Maintenance & Troubleshooting
Posted:
5 Jun 2025 12:21
by
Tech_help
CG30G with Mitsubishi 2.4L engine. LPG. Randomly stopped and now when cranking, engine will crank for about 1 second and...
Maintenance & Troubleshooting
Posted:
5 Jun 2025 07:18
by
Ryan_Taylor
I have a lift that will crank but not start. I have done a tune up and also replaced the...
Maintenance & Troubleshooting
Posted:
5 Jun 2025 03:53
by
Bill_Jefferson
Are you receiving a fault code?
Maintenance & Troubleshooting
Posted:
5 Jun 2025 01:58
by
Keith_Allgood
When this happens, opening the manual emergency lowering valve doesn't change speeds either. When the are lowering at normal speed...
Maintenance & Troubleshooting
Posted:
4 Jun 2025 20:09
by
Samuel_Sutton
E300Aj JLG Lift not going into high gear?
Maintenance & Troubleshooting
Posted:
4 Jun 2025 03:37
by
bluevan
I repaired a code 33 with new transistors, pump driver board and an used logic board. The lift ran for...
Maintenance & Troubleshooting
Posted:
4 Jun 2025 01:30
by
Matthew_Reed
Congrats happens with older units
Maintenance & Troubleshooting
Posted:
3 Jun 2025 20:27
by
Randall_Lomax
By chance did you figure this out? Mine started doing this a week ago.
Maintenance & Troubleshooting
Posted:
3 Jun 2025 18:53
by
elektrodrive
Hi. Do you have info on this error? As I have a truck with the same code.
Maintenance & Troubleshooting
Posted:
3 Jun 2025 18:33
by
B182418m
Hi im having issue with Nichiyu electric reach truck,after driving for 30 minutes then it started to giving problem with...
Maintenance & Troubleshooting
Posted:
3 Jun 2025 12:18
by
Mr_C
Thanks for the reply, I solved it yesterday afternoon, I basically went through the entire troubleshooting section and found that...
Maintenance & Troubleshooting
Posted:
3 Jun 2025 06:46
by
Daniel_Pardikes
Having difficulty with this code. 524226-4.
Unit will intermittently stall with crank no start condition.
I believe this is an...
Maintenance & Troubleshooting
Posted:
3 Jun 2025 02:05
by
Matthew_Reed
Invest in analyzer...pull front plastic cover off in front and check motor controller and contactor
Maintenance & Troubleshooting
Posted:
3 Jun 2025 02:02
by
Matthew_Reed
Haven't heard from you swoop in a bit...was worried...bypass the key switch to verify...if everything works..check contacts
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.