Showing items 641 - 660 of 112,166 results.
Maintenance & Troubleshooting
Posted:
16 Jun 2025 23:17
by
Br455Brute
Lol I caught that too. Thankfully I've been playing with relays for enough years of my life to know the...
Maintenance & Troubleshooting
Posted:
16 Jun 2025 22:00
by
christian_s
I should probably have posted this in the Linde forum??
Safety & Training
Posted:
16 Jun 2025 21:54
by
Bozena_Kuich
Hi everyone,
I'd love to start a discussion on the implementation and benefits of real-time forklift location systems in warehouses...
Maintenance & Troubleshooting
Posted:
16 Jun 2025 21:38
by
PeteH
Had this 2017 xh350l lift about a year. Last week this loud alarming noise goes off and it says hydraulic...
Maintenance & Troubleshooting
Posted:
16 Jun 2025 21:01
by
Cristian_Virgil
Hi Nic,
First I would check for internal leaks in each hydraulic motor (port L). Usually we should have leaks...
Maintenance & Troubleshooting
Posted:
16 Jun 2025 17:42
by
Richard_Irwin
Hi Nic
Not sure of the specific issue and or age of your truck, but Combilift have a dedicated Technical...
Maintenance & Troubleshooting
Posted:
16 Jun 2025 17:20
by
Ivan_Takev
Guys , do you have managed to find the problem. I have a similar issue , the forklift starts good,...
Maintenance & Troubleshooting
Posted:
16 Jun 2025 05:50
by
marksmith
Hi Kirk,
There is probably an internal leak in the brake valve. Seal kit works.
However, it is still useful...
Maintenance & Troubleshooting
Posted:
16 Jun 2025 02:33
by
marksmith
Hi Kamol,
Display="65" No lift truck operation
POSSIBLE CAUSE
Pump motor overtemperature (over 165°C);Pump motor thermal sensor defect ; Control...
Maintenance & Troubleshooting
Posted:
15 Jun 2025 17:43
by
skyreach
hi there are many things that can stop the unit driving but if you have directional change working just a...
Maintenance & Troubleshooting
Posted:
15 Jun 2025 12:53
by
Pyroman
I just bought a 1988 SM42RT lift. I have it running great. Everything is now working except for forward and...
Maintenance & Troubleshooting
Posted:
15 Jun 2025 08:02
by
marksmith
Code Title CAN Bus Communication Error
Operator Display E152
System Response No truck function active.
Alarm Sounds No Reason VM...
Maintenance & Troubleshooting
Posted:
15 Jun 2025 07:44
by
marksmith
If Code 57 appears when exiting Diagnostic Mode, verify that the firmware chip on the Operator Display Interface Card is...
Maintenance & Troubleshooting
Posted:
15 Jun 2025 03:46
by
JKPAINTER
Ok ill try to help Hydraulic system pump valve cylinders flow back to tank. Try one cylinder first to see...
Maintenance & Troubleshooting
Posted:
14 Jun 2025 22:15
by
Scott_
Normally most backfire problems come from some problem with the ingion system l would check the cap roter wires and...
Maintenance & Troubleshooting
Posted:
14 Jun 2025 21:52
by
Scott_
One thing in post said to attach wire to 87 or 87a does not matter it does if you attach...
Maintenance & Troubleshooting
Posted:
14 Jun 2025 21:14
by
Fritzthecat
I saw that happen with faulty ignition wires
Maintenance & Troubleshooting
Posted:
14 Jun 2025 06:02
by
JKPAINTER
Boys hears the trick setup a y connector one to the battery one to a charger and one to the...
Maintenance & Troubleshooting
Posted:
14 Jun 2025 05:29
by
khoppe
I need to know how to correctly set the camshaft timing on a H30 inline 6-cylinder Nissan motor. I have...
Maintenance & Troubleshooting
Posted:
14 Jun 2025 01:32
by
Nic_Olson
The combi will change in all directions but will not drive. Checked the proper fuses and all are good. changed...
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.