Showing items 601 - 620 of 112,166 results.
Maintenance & Troubleshooting
Posted:
21 Jun 2025 01:26
by
John_Bradley
Might check velocity fuse in lift line
They can cause your issue
Maintenance & Troubleshooting
Posted:
21 Jun 2025 00:53
by
darek_s
Thank you Andrew, I'll look into that.
I may not have been totally clear explaining swapping the mini-levers. I did...
Maintenance & Troubleshooting
Posted:
20 Jun 2025 23:03
by
RamKhudan
Hi Frits_f,
Thank you very much!!!
I will work on this, and let you know.
I really appreciate everyone's help...
Maintenance & Troubleshooting
Posted:
20 Jun 2025 15:49
by
NWYaleGuy
The 696 code comes up when the battery has been run flat and jump-started. There's almost never a transmission speed...
Maintenance & Troubleshooting
Posted:
20 Jun 2025 15:49
by
christian_s
I have thought about my options. The electrically controlled valve by the forks for optional attachment would be nice but...
Maintenance & Troubleshooting
Posted:
20 Jun 2025 12:17
by
songyot_v
I got the same problem with my Nissan p1b2l25u it also showing 558 communication problem. there anyone that can help.
Maintenance & Troubleshooting
Posted:
20 Jun 2025 06:42
by
Domingo_Caluag
Anyone with the same problem?
Maintenance & Troubleshooting
Posted:
20 Jun 2025 06:37
by
Rodtrotter
Hi, you'll have to remove the drive motor to fill up the gearbox
Maintenance & Troubleshooting
Posted:
20 Jun 2025 06:32
by
Rat1
I Have Changed out the Lp Regulator / Changed spark plugs and wires Also new Distributor cap and rotor. Also...
Maintenance & Troubleshooting
Posted:
20 Jun 2025 05:16
by
Pyroman
I figured it iut
Maintenance & Troubleshooting
Posted:
20 Jun 2025 03:44
by
Vernon_Jackson
So the problem is the little solenoid valve that comes with the mixer. There was a short in one of...
Maintenance & Troubleshooting
Posted:
20 Jun 2025 03:36
by
ForkliftAmerica
Don't forget that the crank signal from the key switch doesn't just go straight to the starter. If I remember...
Maintenance & Troubleshooting
Posted:
20 Jun 2025 02:27
by
John_Bradley
Also check the diaphragm in the mixer , have seen a lot that stick and cause the same issue
Maintenance & Troubleshooting
Posted:
19 Jun 2025 23:24
by
Brett_Royal
I have a Clark C500 Y110 Type D
Serial number Y1015 103 BRF5066
I'm looking for a service manual or...
Maintenance & Troubleshooting
Posted:
19 Jun 2025 23:06
by
frits_f
the drive potentiometer should read 4,5 volt in neutral. correspinds with 2650 ohm. If not the relais click but slow...
Maintenance & Troubleshooting
Posted:
19 Jun 2025 22:43
by
RamKhudan
Hi Michel_V
Yes the motor is good
Maintenance & Troubleshooting
Posted:
19 Jun 2025 22:43
by
RamKhudan
Hi Michel_V
Yes the motor is good
Maintenance & Troubleshooting
Posted:
19 Jun 2025 15:37
by
michel_v
motor oke ?
Maintenance & Troubleshooting
Posted:
19 Jun 2025 12:59
by
mwjago
No I have not. I do know for certain that the ECM part numbers have to match up with each...
Maintenance & Troubleshooting
Posted:
19 Jun 2025 10:28
by
mrforklift
Hi thanks for your reply,
I have checked the yellow diode as we have had trouble with them before. I...
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.