Showing items 761 - 780 of 112,167 results.
Maintenance & Troubleshooting
Posted:
29 May 2025 20:59
by
Nic_Olson
Issue solved, #11 fuse was blown and rear 90 degree proxy needed to be replaced
Maintenance & Troubleshooting
Posted:
29 May 2025 19:58
by
Richard_Irwin
Hi Nic,
Not sure of the specific issue, but Combilift have a dedicated Technical Team covering North America. If you...
Maintenance & Troubleshooting
Posted:
29 May 2025 18:57
by
Sajad_Rajabi
Dear all
Good day
I recently heard that the hydraulic pump BPV100-01 Rh1 370i, has been discontinued.
Is there a...
Maintenance & Troubleshooting
Posted:
29 May 2025 18:28
by
Karol_Strzok
I need error list. Please
Maintenance & Troubleshooting
Posted:
29 May 2025 14:45
by
Fonseca
did you fixed your problem? I have same problem same code 65 unit inverters does not have DSP and does...
Maintenance & Troubleshooting
Posted:
29 May 2025 06:11
by
Dale_Wood
Customer hit something and broke the windshield. They continued to use the truck but when they shut it off and...
Maintenance & Troubleshooting
Posted:
29 May 2025 03:23
by
Oatman
I had the same question working on the front-drive gear box on an EKS110 order picker. I finally just pulled...
Maintenance & Troubleshooting
Posted:
29 May 2025 02:53
by
John_Bradley
Someone may have bypassed the Curtis since single wire. the unit would have a harness that went to it...
Maintenance & Troubleshooting
Posted:
29 May 2025 02:47
by
John_Bradley
Glad you got it figured out !
Maintenance & Troubleshooting
Posted:
29 May 2025 02:27
by
john_johnson
Thanks for the response- it was the red/blue wire. I ran a temporary wire from the solenoid to the Curtis...
Maintenance & Troubleshooting
Posted:
29 May 2025 02:22
by
John_Bradley
If it is an older unit there may be a Curtis interrupt under the floor plate if so you can...
Maintenance & Troubleshooting
Posted:
29 May 2025 01:46
by
John_Bradley
You should have positive voltage on one wire at all hyd switches wire number 10 ,I believe. the voltage...
Maintenance & Troubleshooting
Posted:
29 May 2025 01:24
by
john_johnson
Hello,
I can't figure out where I lost connection. I might have snagged a wire that runs along the bottom...
Maintenance & Troubleshooting
Posted:
28 May 2025 20:35
by
Binny_Alex
Do any one can provide engine make in Komatsu FD200-5 as well as FD200-8
Maintenance & Troubleshooting
Posted:
28 May 2025 10:52
by
Stephan
Can anyone tell me where to fill the gearbox oil and how to check the level? It has a drain...
Maintenance & Troubleshooting
Posted:
28 May 2025 05:12
by
Brian_Lavin
Hi,
I have an old Mitsubishi FG35 Serial #AF29 8klbs forklift. It has a 6 cylinder engine and was converted...
Maintenance & Troubleshooting
Posted:
28 May 2025 00:49
by
DyslexicNerd_01
Event 637.02 on a C5 with an AN20 engine indicates an issue with the crankshaft posotion sensor (Crankshaft position sensor...
Maintenance & Troubleshooting
Posted:
28 May 2025 00:31
by
Bill_Dipierro
Event 637.02, I found a coolant leak right over an electrical connector. I cleaned that and tightened hoses but I...
Maintenance & Troubleshooting
Posted:
27 May 2025 21:47
by
JonnySkot
I'm trying to connect a Zebra VC8300 mobile computer to a new RRE200H truck. The power connection on the Zebra...
Maintenance & Troubleshooting
Posted:
27 May 2025 15:32
by
Hein
How do you calibrate ? Thank you
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.