Showing items 801 - 820 of 112,167 results.
Maintenance & Troubleshooting
Posted:
24 May 2025 06:27
by
John_Bradley
45 years as lift tech and I've seen a lot of accidents with lifts.glad you got it done and...
Maintenance & Troubleshooting
Posted:
24 May 2025 05:36
by
Michael_Brown
Yup I got this all done and completed. I am an independent forklift tech. I took the cylinder to a...
Maintenance & Troubleshooting
Posted:
24 May 2025 05:00
by
John_Bradley
Neutral safety has nothing to do with spark
First check voltage at coil positive side with key on if voltage...
Maintenance & Troubleshooting
Posted:
24 May 2025 04:52
by
John_Bradley
There is a hub that the drum mounts to , the bolts you removed were to hold drum onto hub...
Maintenance & Troubleshooting
Posted:
24 May 2025 04:44
by
John_Bradley
This is one of the most dangerous actions on a lift truck I know several people that have lost fingers...
Maintenance & Troubleshooting
Posted:
24 May 2025 03:18
by
Flaj76
As far as the neutral safety switch, the wire runs from the start terminal on the ignition switch to the...
Maintenance & Troubleshooting
Posted:
24 May 2025 03:08
by
Flaj76
Yes the carriage has to come out. Put the forks and carriage on top of a pallet. Using a C...
Maintenance & Troubleshooting
Posted:
24 May 2025 02:51
by
Flaj76
You need to take the center of Park brake hub off. I believe it was an 1 and 1/8 socket...
Maintenance & Troubleshooting
Posted:
23 May 2025 16:47
by
Jesusjohn
Thank you Fritz
Maintenance & Troubleshooting
Posted:
23 May 2025 12:18
by
Hein
Every now and then when starting this unit it will show both T230 and T231 at the same time. All...
Maintenance & Troubleshooting
Posted:
23 May 2025 12:18
by
ron_k
Did for some reason the tiller get wet? Remove it and check for corrosion. Second is the tiller cable has...
Maintenance & Troubleshooting
Posted:
23 May 2025 09:07
by
Fritzthecat
arrow facing down on check valve
Maintenance & Troubleshooting
Posted:
23 May 2025 09:04
by
Fritzthecat
Remove torque converter bolts
Maintenance & Troubleshooting
Posted:
23 May 2025 05:54
by
Chris_Burek
Hello, I have a Nissan 35 model kcph01a18pv chassis number kcph01p902419. It will start with ether and once it's warm...
Maintenance & Troubleshooting
Posted:
23 May 2025 03:03
by
ForkliftAmerica
For the trucks we've had to deal with, the battery is actually part of a chip on the board. It's...
Maintenance & Troubleshooting
Posted:
23 May 2025 02:02
by
RandomTXguy
I just picked up a H25CT from an auction and all seems good but there is a sound that might...
Maintenance & Troubleshooting
Posted:
23 May 2025 01:20
by
John_Bradley
I looked up code in manual , 110 is slave controller VMN high
Shorted cables ,shorted motor or shorted controller...
Maintenance & Troubleshooting
Posted:
22 May 2025 23:39
by
Syed
Hi,
I need service code for calibrate the multi task joystick. Can anybody share the code
Maintenance & Troubleshooting
Posted:
22 May 2025 22:17
by
John_Bradley
Always get another unit ! First check 500 amp fuse , it is main drive fuse I have seen a...
News & Perspectives
Posted:
22 May 2025 21:35
by
James_Maverick
I was in the same boat and went with forklift training and did a job for sometime as FLT driver...
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.