Showing items 381 - 400 of 111,482 results.
Technical Troubleshooting
Posted:
25 Mar 2025 03:58
by
YaleTrouble2
Got it running. It was just a fuse located at the rear of the lift. A simple 5 amp fuse...
Technical Troubleshooting
Posted:
25 Mar 2025 03:53
by
John_Bradley
Mid 70's
Technical Troubleshooting
Posted:
25 Mar 2025 01:04
by
Fishmech
Yale,
Verify battery voltage is above 36 volts, about 38 volts. If the operating system is 48 volts it should...
Technical Troubleshooting
Posted:
25 Mar 2025 00:57
by
Fishmech
Jerry,
CPS 206 is for a relay. Install relay into connector and see if truck starts. This supplies power to...
Technical Troubleshooting
Posted:
25 Mar 2025 00:28
by
Fishmech
Ryan,
The transmission fluid on older transmissions is dexron 2. Now you use dexron 3. Some older heavier lifts will...
Technical Troubleshooting
Posted:
25 Mar 2025 00:09
by
YaleTrouble2
Tried as you instructed. No response. I purchased from an auction. But when I first looked at the machine I...
Technical Troubleshooting
Posted:
25 Mar 2025 00:04
by
John_Nix
Rc5545 with TT mast. Both stages lift at the same time? No codes
Technical Troubleshooting
Posted:
24 Mar 2025 23:55
by
Fishmech
Jim,
Behind the kick panel on the right side, the VSM is mounted to the front panel. The kick panel...
Technical Troubleshooting
Posted:
24 Mar 2025 23:05
by
Fishmech
Yale,
Sounds like you have telemetry installed on this lift. That small screen on the left side is used for...
Technical Troubleshooting
Posted:
24 Mar 2025 22:59
by
Fishmech
Rb,
Calibrate the lift lower switch or function of the joystick. Remove lower cover of the armrest. Unplug the joystick...
Technical Troubleshooting
Posted:
24 Mar 2025 22:37
by
Fishmech
Chandler,
This code shows as Transmission temp OORL. Since trans was rebuilt, check wire harness for temp sensor, wire 367...
Technical Troubleshooting
Posted:
24 Mar 2025 17:31
by
Nitin_Rattu
I want to access the mask menu to change tuning of the forklift.
It has 2 arrow keys and a...
Technical Troubleshooting
Posted:
24 Mar 2025 11:28
by
Scott_Dacri
Thanks for the info John.
A link to the manuals would be great !
Do you know from my serial numbers...
Technical Troubleshooting
Posted:
24 Mar 2025 10:09
by
ScottJ
Brand New to this Forum. I purchased this Forklift last week, it ran fine at the facility I purchased from...
Technical Troubleshooting
Posted:
24 Mar 2025 09:30
by
marcos_m
Anyone know how to fix code 126 on Skyjack scissor lift?
Technical Troubleshooting
Posted:
24 Mar 2025 08:28
by
Garrett_Downing
Thank you! I will look into the injectors. Any idea on any sensors it could be? Trying to start small...
Technical Troubleshooting
Posted:
24 Mar 2025 07:55
by
Chris_Johnson
Yeah, the supply around here is terrible, we have one company that has their own tank, around two thousand gallon...
Technical Troubleshooting
Posted:
24 Mar 2025 06:38
by
andrew_k
This was a common problem in the uk last year when our gas supplies were of poor quality. Not been...
Technical Troubleshooting
Posted:
24 Mar 2025 04:50
by
Scott_
Haven't worked on that model truck but sounds like you have bad volisite fuses in the lift cylinders that would...
Technical Troubleshooting
Posted:
24 Mar 2025 03:17
by
John_Bradley
It is a wet bell housing, trans fluid should be in it be sure to get sealed starter with a...
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.