Showing items 103,601 - 103,620 of 111,545 results.
Technical Troubleshooting
Posted:
21 Nov 2008 22:18
by
edward_t
and the Ignition timing? and try a new battery, your old batery may be revesing polarity and still drawing down...
News & Perspectives
Posted:
21 Nov 2008 22:05
by
edward_t
within an hour of my typing that, I was informed the company I work for has cut 3% of it's...
Technical Troubleshooting
Posted:
21 Nov 2008 21:13
by
Leon_W
Code CO16 indicates: Voltage from accelerator pedal's potentiometer R1 is outside the calibrated value at start up.
(+/-0.2V).
Check nothing...
Technical Troubleshooting
Posted:
21 Nov 2008 12:26
by
tom_v
You say if turns over but very slow even while being boosted.
Have you checked out the starter???
Technical Troubleshooting
Posted:
21 Nov 2008 08:37
by
rich_k
Hey guys, I have this old AC that won't start. Turns over but very slow even while being boosted. Checked...
Design & Engineering
Posted:
21 Nov 2008 07:33
by
cat1
Hi All
I have a customer who has had their trucks tested and have found that they will not pass...
Technical Troubleshooting
Posted:
21 Nov 2008 05:56
by
jim_v
I have no power to wire 34. Cap charges very fast. connections look good. no burnt parts. need trouble shooting...
News & Perspectives
Posted:
21 Nov 2008 03:41
by
upliftUK
most the companies i know have but a stop on overtime, no job's loses in the industry that i know...
Design & Engineering
Posted:
21 Nov 2008 03:33
by
elektrodrive
I recently had a nissan electric truck with a similar problem, it had a steer contactor which would not energise...
Design & Engineering
Posted:
21 Nov 2008 03:28
by
elektrodrive
Perhaps I can provide a repair service for you, contact me if you need to through my website elektrodrive dot...
Design & Engineering
Posted:
20 Nov 2008 23:21
by
Dirk
The only reason I thought the fluid might be low was that it leaves puddles whenever it sits for awhile
Design & Engineering
Posted:
20 Nov 2008 23:18
by
Leon_W
What are the part numbers, my email is in my profile. I'll check my supplier.
Design & Engineering
Posted:
20 Nov 2008 22:55
by
quintin_k
hey chaps. i know i'm in a different country, but repairing any controllers is what i do. i have repaired...
Design & Engineering
Posted:
20 Nov 2008 22:33
by
FLTdotCOdotUK
Nice one pal, cheers.
Design & Engineering
Posted:
20 Nov 2008 22:28
by
quintin_k
i would check steering motor, maybe your brushes is worn or your armature could be dirty. i'm not to sure...
News & Perspectives
Posted:
20 Nov 2008 21:59
by
edward_t
We may well see a lot of companies who's owners don't really have any equity in the company, take a...
News & Perspectives
Posted:
20 Nov 2008 21:47
by
edward_t
I wonder if anyone is seeing any door closings on brand name dealers, or just "right sizing" for the market...
News & Perspectives
Posted:
20 Nov 2008 10:11
by
proshadetree
What we are getting is factory slow downs ,then layoffs now the truck that used to get 300 hrs a...
Design & Engineering
Posted:
20 Nov 2008 09:06
by
justinm
if the fluid was low, as you raised the mast, it would start to shake and shutter as air is...
Design & Engineering
Posted:
20 Nov 2008 08:29
by
justinm
o whoops lol
i read the brake/ incline post and must have had that on the brain
sorry bout that
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.