Hello, I have an '07 with VW LPG engine. Code T248. Code sets when traveling at full throttle, and during full lift request when engine reaches full rpm. I have replaced the speed sensor in the bell housing. It looked like it had been scrapping on the flywheel. The flywheel shows some wear on the teeth. I also replaced the potentiometer on the accelerator.
Also if I need to replace the flywheel, can someone give me direction.
Do I pull the motor, or the pump assy. I have a Linde repair manual it says nothing about flywheel replacement
Thank you in advance for any input.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.