Showing items 105,041 - 105,060 of 112,347 results.
Maintenance & Troubleshooting
Posted:
26 Sep 2008 22:21
by
duodeluxe
I believe that Stocka pallet trucks were made in Sweden and in the US they were sold by American Lifts...
News & Perspectives
Posted:
26 Sep 2008 20:58
by
edward_t
in my humble opinion. all these numbers are just about (edumacted) W.A.G.s, since none are calculating the full_ wattage_ used...
Maintenance & Troubleshooting
Posted:
26 Sep 2008 19:21
by
Leon_W
Could anyone help me with a parts list for a Still Stocka hand pallet trucks, parts list complete with brake...
News & Perspectives
Posted:
26 Sep 2008 15:01
by
george_v
How would you calculate the fuel savings for a standard LPG forklift? Assumptions are an 8 hour shift two 15...
Maintenance & Troubleshooting
Posted:
26 Sep 2008 14:25
by
tunaguy
Thanks for all the help. Forklift never acted up very long until recently. When the lift finally quit I traced...
Maintenance & Troubleshooting
Posted:
26 Sep 2008 12:43
by
justinm
i get A6-1 when i turn the key
and A6-2 and A6-5 when i pull the levers
no lift
f&r...
News & Perspectives
Posted:
26 Sep 2008 09:11
by
proshadetree
Ill park it then take extra tools back home.Threats of parking vans dont go to well for equipped techs.Cost of...
Maintenance & Troubleshooting
Posted:
26 Sep 2008 07:39
by
rich_k
Yeah, i have had that problem before and mentioned that earlier to tunaguy but haven't heard back , Rich
Maintenance & Troubleshooting
Posted:
26 Sep 2008 02:51
by
J_Newton
Is there any technical info or spec's available for the Crown access3 control or the access 123 control set?
Maintenance & Troubleshooting
Posted:
26 Sep 2008 02:07
by
Prentice
Open detected in armature circuit- Check Fuse #5 - Visually inspect 'B' contact's tips for weld condition ( if by...
Maintenance & Troubleshooting
Posted:
26 Sep 2008 01:16
by
DaveUK
Try Googling Kane Automotive, I bought mine from them. I bought a single gas analiser (CO) only, because thats all...
Maintenance & Troubleshooting
Posted:
26 Sep 2008 00:18
by
debbie_b
what does code 23 mean?
Maintenance & Troubleshooting
Posted:
26 Sep 2008 00:03
by
Hawkeye
I am not ready to start scrapping paint yet. There is a flat spot (maybe 2"x12" with bolt holes at...
Maintenance & Troubleshooting
Posted:
25 Sep 2008 23:33
by
bill_g
NEED A SET OF BRAKE DRUMS FOR MY V300B SERIAL: 72Y01492 TYPE D
Maintenance & Troubleshooting
Posted:
25 Sep 2008 22:50
by
Prentice
I had this problem last week and forgot to reply back to tunaguy. I replaced the propane lock-off and the...
Maintenance & Troubleshooting
Posted:
25 Sep 2008 22:36
by
Prentice
I agree with the above Model/Serial # locations. You might have to scrape the old paint off the frame in...
News & Perspectives
Posted:
25 Sep 2008 22:30
by
duodeluxe
Let's say that a dealership normally pays the road tech travel time and also collects it from the customer. What...
Maintenance & Troubleshooting
Posted:
25 Sep 2008 21:25
by
Dragonstaff
5R is a Toyota engine designation, but that doesn't mean it is a Toyota machine.Engines got sold all over the...
Maintenance & Troubleshooting
Posted:
25 Sep 2008 15:18
by
BEST
I have an E30 with a drive fault. All checks out ok up to the drive control. I get the...
Maintenance & Troubleshooting
Posted:
25 Sep 2008 13:20
by
roldann
Thanks for your reply jhongen.. you are right about changing the entire kit. i was refering to the posibility the...
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.