Showing items 104,161 - 104,180 of 112,344 results.
Maintenance & Troubleshooting
Posted:
11 Dec 2008 09:25
by
elektrodrive
Try jacking the truck up and see if it runs smoothly jacked up? Try work out if its a mechanical...
Maintenance & Troubleshooting
Posted:
11 Dec 2008 09:11
by
upliftUK
Our toyota 7FBEST15 has a drive fault. there is no fault codes. when driving forward or reversing the truck starts...
Maintenance & Troubleshooting
Posted:
11 Dec 2008 08:58
by
rich_k
Had similar problem before but problem was in throttle box. Is this the one with a switch and pot in...
Maintenance & Troubleshooting
Posted:
11 Dec 2008 08:37
by
DAMO
CHEERS FOR THE REPLY BLACKIE..........
IS THERE ANY WAY OF ACSESSING THE PARAMETERS THREW THE DASH PANEL?..
OR DO...
Maintenance & Troubleshooting
Posted:
11 Dec 2008 08:00
by
blackie
Hello
39 Incorrect type
81 parameters not correct
83 incorrect or no tract/lift code
Reset all the parameters with an...
Maintenance & Troubleshooting
Posted:
11 Dec 2008 07:35
by
kevin_k
you say jump as in full speed then nothing. check 2 rec and 5 rec connections are good....
Maintenance & Troubleshooting
Posted:
11 Dec 2008 07:20
by
PR2005
Thanks Rich
Maintenance & Troubleshooting
Posted:
11 Dec 2008 06:47
by
Prentice
We have a customer that complains when unit is in forward or reverse it accelerates on it's own when the...
Maintenance & Troubleshooting
Posted:
11 Dec 2008 05:17
by
DAMO
I HAVE A BOSS 3 WHEEL COUNTER BALANCE IT HAS THE PILOT CONTROLS FOR THE HYDRAULICS...THE MODEL IS AS...
Maintenance & Troubleshooting
Posted:
11 Dec 2008 03:37
by
mrfixit
I have a E30 XL the will jump, shut down, and show code 57 (polarity wrong on current sensor) when...
Maintenance & Troubleshooting
Posted:
10 Dec 2008 21:46
by
slorke
Need: MOFSET SPEED CONTROLER 450 AMP. 48 V DC SERIES WOUND MOTOR. MAKE
CURTIS. FOR FORKLIFT. Required for battery operated...
News & Perspectives
Posted:
10 Dec 2008 19:19
by
Snapman
Hi uplift, yes I mean barlowworld and not Hyster.
Thanks, Snapman.
Maintenance & Troubleshooting
Posted:
10 Dec 2008 13:20
by
fabio01
Hello Controlelectric
Thank you for responding.
is not a loaded truck is a forklift (montacarga)
this has no control electronic....
News & Perspectives
Posted:
10 Dec 2008 07:17
by
upliftUK
do you meen barlow world?
Maintenance & Troubleshooting
Posted:
10 Dec 2008 02:59
by
pelletman
OK< nevermind. We found that the shift wasn't making contact with the little contactors. It was getting hung up on...
Maintenance & Troubleshooting
Posted:
10 Dec 2008 02:12
by
pelletman
Hi guys, same forktruck from the last post, now that I have it running, the transmission seems to have an...
Maintenance & Troubleshooting
Posted:
10 Dec 2008 00:42
by
pelletman
This problem turned out to be a screwed up firing order. I got the machine not running. I went with...
Maintenance & Troubleshooting
Posted:
9 Dec 2008 21:58
by
AndyPandy
Hello Steve
13 is related to the traction IGBT, 16 is the stall timer and 19 is traction motor over...
Maintenance & Troubleshooting
Posted:
9 Dec 2008 19:50
by
steve_h
Any one offer any help with the above m/c, getting various error codes. 13, 16 & 19.
Safety & Training
Posted:
9 Dec 2008 17:50
by
maurice_r
yes I have been in contact with both JCB in NZ and outside, have approached JCB agents but they could...
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.