Hello,
did anybody change the old traction motors with new NEO traction motors?
I'm looking for some feedback...
Regards
Showing items 1 - 8 of 8 results.
Thank you. I just saw your reply. I'll hit my local dealer up again. They never did get back with me the first time.
According to bulletin 12-04-01 the part number for the NEO motors is 151260 (NEO)
I posed the question of ''What is a NEO motor" to my nearest dealer. He didn't seem to know anything about them and was going to contact his district Service/Parts manager. That was on July 12...no response from him yet. Would you be able to provide a part number or additional information on the NEO motors? Thank you for your help and insight!
Hello,
I have succcessfully connected to the controller with Curtis handset 1311-4401. There's no password defenetly.
I also managed to change the settings needed for NEO motors.
Now, I "just" have to convince the customer that spending a fortune on NEO motors is a good invesment.
Regards
The Neo motors came out with a service bulletin. yes it does require a software upgrade that is done with a Crown dongle designed for the wave.
I recommend reading the bulletin (12-04-01 )
I work for crown Australia fo nearly 30 years
WAV doesn't need password
I will ask about NEO motors and software as we are only just getting NEO motors in
The new NEO motors don't need new software.
It's just necessary to make 3 changes to settings in the Curtis controller.
This can be done by Curtis handset with OEM access.
The handset can be bought from Curtis.
I'm thinking of buying it but I wanted to check some things.
First of all I wanted to check can the settings be accessed
just with the handset or I need to have password from Crown.
Crownie, do you usually work with Crown equipment?
i believe the new neo motors require new software
but haven't done any yet
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.