Showing items 161 - 180 of 112,158 results.
Maintenance & Troubleshooting
Posted:
12 Sep 2025 05:57
by
garland_m
Gotcha,
Sounds like you have a switch hung or wiring to the handle, possibly the handle brake sensor. Make sure...
Maintenance & Troubleshooting
Posted:
12 Sep 2025 05:49
by
garland_m
Rocky,
VSM may be causing the issue, but I would not replace unless you are positive. I would verify all...
Maintenance & Troubleshooting
Posted:
12 Sep 2025 05:39
by
garland_m
50C,
The dipstick might be a low profile and hard to see. The transmission should take dexron. The clutch may...
Maintenance & Troubleshooting
Posted:
12 Sep 2025 05:32
by
garland_m
First,
You are correct. One lever is for high or low speed and one is for travel. Check for the...
Maintenance & Troubleshooting
Posted:
11 Sep 2025 02:43
by
Nic_Olson
Problem was solved. We went over the proxy sensors again, and found the rear zero degree proxy was staying on,...
Maintenance & Troubleshooting
Posted:
10 Sep 2025 18:44
by
Richard_Irwin
Hi Nic,
Sounds like you have some good checks already completed. Need to step through the process, Might be a...
Maintenance & Troubleshooting
Posted:
10 Sep 2025 05:28
by
Nic_Olson
We have 2022 C6000 combi. There rear wheel will not change into forward or reverse mode. Will change into sideways...
Maintenance & Troubleshooting
Posted:
10 Sep 2025 05:12
by
VBIFWM
I will get the DVM out and check as you suggested.
Thank you John.
News & Perspectives
Posted:
9 Sep 2025 18:33
by
lifter01
John R I don't know which company the Op works for but in the UK if your a mobile engineer...
Maintenance & Troubleshooting
Posted:
9 Sep 2025 09:28
by
John_Bradley
Yes , see the solenoids ? Make sure as key is on and sitting in seat that you have battery...
Maintenance & Troubleshooting
Posted:
9 Sep 2025 08:37
by
VBIFWM
Is this the valve you were concerned with?
Maintenance & Troubleshooting
Posted:
9 Sep 2025 07:09
by
John_Bradley
Can you post picture of control valve ?
Some have a solenoid that shuts off hyd
Unless on seat if...
Maintenance & Troubleshooting
Posted:
9 Sep 2025 06:57
by
VBIFWM
This Machine has the three individual levers, Mast raise/lower, Mast tilt, Side shifter.
Maintenance & Troubleshooting
Posted:
9 Sep 2025 04:44
by
John_Bradley
Glad you got the parts
Maintenance & Troubleshooting
Posted:
9 Sep 2025 03:51
by
RYAN_Houlihan
Found a rebuild kit through the engine stamping. Thank you
Not sure if I can close this thread
Maintenance & Troubleshooting
Posted:
9 Sep 2025 03:48
by
RYAN_Houlihan
I called my local and one in Sacramento. Thats who kinda guessed it to be a gp030.
I found a...
Maintenance & Troubleshooting
Posted:
9 Sep 2025 03:43
by
John_Bradley
I would call local Yale dealer give serial number to parts dept they can tell you what it is and...
Maintenance & Troubleshooting
Posted:
9 Sep 2025 03:38
by
John_Bradley
Does this lift have joystick or levers for hyds ?
I ask because they had option for joysticks
Electronic lift...
Maintenance & Troubleshooting
Posted:
8 Sep 2025 22:10
by
daniele_t
Hi, I have a problem with a Genie S125 (S/N:S12505-1161) year 2005, I've been trying to fix it for a...
Maintenance & Troubleshooting
Posted:
8 Sep 2025 12:45
by
RYAN_Houlihan
I have a yale model ??
It's a 2008
Serial number is C810v0229F
It's a lp
Engine block stamp FE...
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.