Showing items 421 - 440 of 112,161 results.
Maintenance & Troubleshooting
Posted:
23 Jul 2025 14:22
by
Joseph_Bilodeau
Hello, hoping someone will be able to help me with my issue or issues lol. i recently purchased a used...
Maintenance & Troubleshooting
Posted:
23 Jul 2025 01:56
by
John_Bradley
Just for grins , check the positioning switches and tach on drive motor those have to reposition the drive unit...
Maintenance & Troubleshooting
Posted:
22 Jul 2025 08:04
by
RamKhudan
Hi Ron and John,
I swapped the key switch and distribution Panel assembly
Check continuity from key switch to distribution...
Maintenance & Troubleshooting
Posted:
22 Jul 2025 06:18
by
Capay_Miller
First-time post!
The mast tilt and side-shift pump on my elderly ERP035 stopped working last week, and I'm hoping to...
Maintenance & Troubleshooting
Posted:
22 Jul 2025 03:52
by
UPOW
Key on, power at fuse for 2 sec, then no power, fuse is good, relay is tested good, swapped relay...
Maintenance & Troubleshooting
Posted:
22 Jul 2025 03:38
by
UPOW
UPDATE: This morning I replaced the engine harness with the spare I had, everything plugged in, new fuses, relays in...
Maintenance & Troubleshooting
Posted:
22 Jul 2025 01:35
by
Jason_Kinzer
The lift starts and idles perfect, when you push the throttle the engine only revs up just enough to notice...
Maintenance & Troubleshooting
Posted:
21 Jul 2025 18:36
by
Richard_Irwin
Hi,
You mentioned that it was different with Key off versus key off and Isolation switch off. Check both the...
Maintenance & Troubleshooting
Posted:
20 Jul 2025 07:37
by
marksmith
66 BATTERY LOW
When the battery charge level reaches 20% or less or (10% on the dash display), the current...
Maintenance & Troubleshooting
Posted:
20 Jul 2025 07:27
by
marksmith
L342= Pressure sensor signals not correct in relation to each other
Maintenance & Troubleshooting
Posted:
20 Jul 2025 05:31
by
BLey
Yeah problem with continuity is that when your circuit checking you have to disconnect the circuit on both ends to...
Maintenance & Troubleshooting
Posted:
20 Jul 2025 04:38
by
UPOW
Engine wouldn't run when relay was bypassed, I was able to get fuel to push through the system but no...
Maintenance & Troubleshooting
Posted:
20 Jul 2025 03:53
by
Scott_
Joe are they trying to say that after you installed it the first time after they fixed it that something...
Maintenance & Troubleshooting
Posted:
20 Jul 2025 00:45
by
BLey
When you bypassed the power relay did the engine run?
This will suck if it does end up being a...
Maintenance & Troubleshooting
Posted:
20 Jul 2025 00:28
by
lumberjack
Yup, solid pneumatics on this truck too. I ended up with a shim plus a 1/8 inch angle iron tack...
Maintenance & Troubleshooting
Posted:
19 Jul 2025 23:30
by
UPOW
Just read your reply deeper, yes I have tried jumping it to no avail, that's what the Combi support tech...
Maintenance & Troubleshooting
Posted:
19 Jul 2025 23:24
by
UPOW
I appreciate the ideas, Monday I return to work I'll post some before and after pics as to show what...
Maintenance & Troubleshooting
Posted:
19 Jul 2025 22:10
by
Joe_Jardas
They just responded after months,
When we received it back as a warranty request, my tech
inspected the controller and...
Maintenance & Troubleshooting
Posted:
19 Jul 2025 07:53
by
BLey
Sounds like youve done quite alot of digging and replacing already. Just wanted to throw some Ideas your way.
Im...
Maintenance & Troubleshooting
Posted:
19 Jul 2025 07:35
by
ron_k
I believe there are multiple shims you can do yes. Angled for the hooks the weights sit on. They get...
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.