Showing items 141 - 160 of 111,454 results.
Technical Troubleshooting
Posted:
15 Apr 2025 22:02
by
Markoes
We have a Still R20-18 here, built in 2005. We would like to do a service reset. What code do...
Technical Troubleshooting
Posted:
15 Apr 2025 17:58
by
Ayoub_Haddadi
O
Oh really idk how to do that maybe I need a special technicien for that.
Technical Troubleshooting
Posted:
15 Apr 2025 17:50
by
marantonious
You need the software
Technical Troubleshooting
Posted:
15 Apr 2025 13:15
by
Forktechy
Hey Mate, try plugging the charger in for 1 minute just to kick in some amps to reset the bdi...
Technical Troubleshooting
Posted:
15 Apr 2025 06:35
by
Matthew_Reed
There is a height proximity limit switch on the right side of the machine undo the covers...verify that is still...
Technical Troubleshooting
Posted:
15 Apr 2025 04:46
by
JBDragon
Fixed it, kind of. It seemed to be stuck up for some reason. Once I got onto the force and...
Technical Troubleshooting
Posted:
15 Apr 2025 03:58
by
Sergey_Salnikov
Good day colleagues. Please help me repair the display from this forklift. Flash memory needs to be updated MX27C512PI-70. Or...
Technical Troubleshooting
Posted:
15 Apr 2025 03:21
by
JBDragon
I have no error codes. It's al the way up and now doesn't want to go down at all. All...
Technical Troubleshooting
Posted:
15 Apr 2025 01:13
by
Fishmech
Dave,
Depending on the condition, do all functions operate and engine runs smooth. Do you have any hydraulic leaks? Will...
Technical Troubleshooting
Posted:
15 Apr 2025 00:53
by
Dave_Thomas
I am looking for the approximate value of something like this.
Technical Troubleshooting
Posted:
15 Apr 2025 00:41
by
Tommy_Green
I am going to have to respectfully disagree. Internal or external regulator, it must be interrupted by the ignition switch...
Technical Troubleshooting
Posted:
14 Apr 2025 23:46
by
Fishmech
Dave,
What info are you looking for? This lift tuns of either gas or LP. Picks up 4000 lbs with...
Technical Troubleshooting
Posted:
14 Apr 2025 23:37
by
Fishmech
Jeffrey,
Sounds like you either have a blown fuse or bad relay. Remove the floorboard and look at the relays...
Technical Troubleshooting
Posted:
14 Apr 2025 22:39
by
Fishmech
Zeeker,
The anti-stall solenoid is not getting the correct voltage or is shorted internally. Using a VOM on ohms, check...
Technical Troubleshooting
Posted:
14 Apr 2025 22:26
by
Fishmech
Zeeker,
Without having the correct password, you will not be able to clear the codes. If you know where the...
Technical Troubleshooting
Posted:
14 Apr 2025 22:14
by
Fishmech
Daniel,
Code 2000-12 suggest a problem with communication between the ACU and VSM. Check the connections on the CANBUS system...
Technical Troubleshooting
Posted:
14 Apr 2025 18:38
by
michel_v
216 Fault wheel speed signal right (signal A and B mismatch on the right sensor)
Technical Troubleshooting
Posted:
14 Apr 2025 17:10
by
manny_patel
ERROR T231
Technical Troubleshooting
Posted:
14 Apr 2025 06:50
by
lifter01
This is a common fault with the H60xm and has nothing to do with the alternstir wiring as the rumegulator...
Technical Troubleshooting
Posted:
14 Apr 2025 06:42
by
Matthew_Reed
Don't know much about yales..but on Toyotas there is a signal wire on the starter...verify that..if the wire is tight...
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.