Showing items 101 - 120 of 111,447 results.
Technical Troubleshooting
Posted:
19 Apr 2025 17:03
by
miroslavval
Ok,send diagram if you have it.I think fuses didn't missing,fire relays I'm not sure will check.
Technical Troubleshooting
Posted:
19 Apr 2025 16:48
by
Sebastian_K
Hi,
We're you able to solve the problem?
I am in Poland now having the same issue with a g15s...
Technical Troubleshooting
Posted:
19 Apr 2025 10:07
by
Scott_
On the top of the converter you will see approx 19 mm. Bolt head with a Phillips head slot in...
Technical Troubleshooting
Posted:
19 Apr 2025 09:36
by
John_Bradley
LHC- Linde hydraulic controller
Technical Troubleshooting
Posted:
19 Apr 2025 09:30
by
John_Bradley
My main concern is not bad fuse but missing fuse or relay if you had a diagram of fuse snd...
Technical Troubleshooting
Posted:
19 Apr 2025 07:37
by
miroslavval
No I didn't have,but all fuses are good
Technical Troubleshooting
Posted:
19 Apr 2025 06:13
by
John_Bradley
Do you have layout for fuse and relays ?
If you can find the signal wire from LHC
To the coils...
Technical Troubleshooting
Posted:
19 Apr 2025 05:40
by
miroslavval
I have one diagram for 393 ,but for joystick pins are same.Ecu don't recognize signal for lift and to...
Technical Troubleshooting
Posted:
19 Apr 2025 05:38
by
John_Bradley
Could be , but first do you have or cs. You get a wiring diagram ?
I hate to replace the LHC...
Technical Troubleshooting
Posted:
19 Apr 2025 05:10
by
Aquilon
Hey Scott, is there a specific gauge to use to check LPG pressure? I'll get it checked out today if...
Technical Troubleshooting
Posted:
19 Apr 2025 00:13
by
miroslavval
Hi I test it and jostick is combined.With tilt it give error ,with lift doesn't give error.Wiring to ecu...
Technical Troubleshooting
Posted:
18 Apr 2025 14:45
by
Kiwiimports
Thanks for that information. Much appreciated.
Technical Troubleshooting
Posted:
18 Apr 2025 14:44
by
Matthew_Reed
More likely in the joystick...however get a 6-12vt load tester and push load test button for a couple of seconds...
Technical Troubleshooting
Posted:
18 Apr 2025 12:19
by
Matthew_Reed
Sounds like a battery current issue to me...load test each battery to verify no bad cell
Technical Troubleshooting
Posted:
18 Apr 2025 12:16
by
Matthew_Reed
Ok...do troubleshooting in manual for 661...if everything passes 662...it will tell you what needs replaced for sure
Technical Troubleshooting
Posted:
18 Apr 2025 11:53
by
Kiwiimports
Hi,
Ive got a S1930E scizzorlift having issues.
Seems to be running in almost limp mode, Rabbit and turtle mode...
Technical Troubleshooting
Posted:
18 Apr 2025 10:20
by
Scott_
First did you check the converter pressure with a gauge in the top of the Nikki converter you should have...
Technical Troubleshooting
Posted:
18 Apr 2025 00:24
by
JimmieG
We're working on a Toyota 8FGU45 forklift with a 3.7L 4-cylinder engine. The drive shaft broke and was recently repaired...
Technical Troubleshooting
Posted:
17 Apr 2025 19:34
by
Marcas_Belanger
Yes I have analyzer. I have tried resetting model number only code I get after everything I try is the...
Technical Troubleshooting
Posted:
17 Apr 2025 19:32
by
marcb
I've send you an email.
Marcb
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.