Showing items 104,721 - 104,740 of 111,515 results.
News & Perspectives
Posted:
3 Aug 2008 00:04
by
cownd
I apoligize for the sales remark, as a former field tech of 30 years and now 5 years as a...
News & Perspectives
Posted:
2 Aug 2008 21:09
by
proshadetree
Justin dude I didnt think youd ever go it alone with no factory support in this day and age.I wish...
Design & Engineering
Posted:
2 Aug 2008 19:06
by
elektrodrive
Hi there, thank you for the advice. Its the original NH card which originaly worked fine, however the fault had...
Technical Troubleshooting
Posted:
2 Aug 2008 09:43
by
justinm
the controller on the side is the ECM (engine control module)
you can bring stored codes up on the check...
Design & Engineering
Posted:
2 Aug 2008 09:29
by
justinm
o wait a second
i had this happen in a crown reach truck once that another dealer was trying to...
Design & Engineering
Posted:
2 Aug 2008 08:49
by
justinm
have you tried another BDI? even a generic one from another truck? what does the handset say for battery% while...
News & Perspectives
Posted:
2 Aug 2008 08:29
by
mike_d
I have been looking for this info with no luck. There is a company tha can provide the inforamation but...
News & Perspectives
Posted:
2 Aug 2008 08:17
by
justinm
ok i wish you guys read what i typed in its entirety (hopefully thats just for message boards and not...
Design & Engineering
Posted:
2 Aug 2008 05:02
by
kevin_k
are you getting battery volts to the dash. i,ve seen bad connection cause this before. rotten wiring under the battery...
Technical Troubleshooting
Posted:
2 Aug 2008 04:08
by
martin_k
i take it that the sideshift does not work,error 25 is a wire broken within the sideshift loom.try replacing the...
Design & Engineering
Posted:
2 Aug 2008 03:24
by
elektrodrive
From what you have stated that it shoots off, i would say whatever the fault, there must be a problem...
Design & Engineering
Posted:
2 Aug 2008 03:16
by
elektrodrive
Hi there can anyone provide some assistance on this fault with a hyster which has the general Electric EV100 IGBT...
Design & Engineering
Posted:
2 Aug 2008 00:55
by
fabio01
thanks rogeriwt for your answer also I saw that before code 18 he appears code 65. I verify this and...
Design & Engineering
Posted:
2 Aug 2008 00:55
by
Prentice
Hello,
I checked out the previous reports on this site for no throttle response. Has any one had problems with...
Technical Troubleshooting
Posted:
2 Aug 2008 00:36
by
tran_v
Forklift can not forward, backward and can not lift, low. I had checked this unit, but can not find the...
News & Perspectives
Posted:
2 Aug 2008 00:34
by
FORKLIFTMAN
... and another one bitest the dust.
Hear-ye! Hear-ye!
TVH bought Advance forklift! If you bought into the "One stop Shop...
News & Perspectives
Posted:
2 Aug 2008 00:10
by
cownd
Let's say your fleet is only 25 machine but, it happens to be a foundry type application, is one tech...
News & Perspectives
Posted:
2 Aug 2008 00:02
by
roadrat
What is going on with Barloworld in the southeast area?
Several Techs laid off in several branches across Southeast region...
News & Perspectives
Posted:
1 Aug 2008 23:00
by
roadtek
I aggree with the statement you need 50-60 trucks to keep a tech busy. Any less would be a waste...
Technical Troubleshooting
Posted:
1 Aug 2008 22:10
by
justinm
if its a 4g54 it has a chain
if its a 4g63 it has a belt
take vacuum tests that...
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.