Showing items 221 - 240 of 111,457 results.
Technical Troubleshooting
Posted:
9 Apr 2025 14:16
by
zach_reiter
The low LP light no longer stays on. I changed vaporizer however it's still running rough. The throttle body sensor...
Technical Troubleshooting
Posted:
9 Apr 2025 11:20
by
Scott_Palmer
Hi guys! I have a Toyota 5FBE18, S/N 32831. The P.S. Motor comes on when the steering wheel is turned...
Technical Troubleshooting
Posted:
9 Apr 2025 11:15
by
Scott_Palmer
Hi guys! I have a Toyota 5FBE18, S/N 32831. It has fault code EE flashing on the display - I have...
Technical Troubleshooting
Posted:
9 Apr 2025 07:31
by
BWAnvil
after starting and moving lever top forward, it will rev up, but will not immediately go into gear, after moving...
Technical Troubleshooting
Posted:
9 Apr 2025 07:13
by
Pistolpeted
Ok got it thanks
So if one unit has it and there's no way to access the dash because it's...
Technical Troubleshooting
Posted:
9 Apr 2025 01:32
by
thebigt
Battery display indicator is only reading 19% the battery is reading 25 on the handheld. And plugging a total different...
Technical Troubleshooting
Posted:
8 Apr 2025 23:51
by
Fishmech
Pistol,
CDF - Configuration Data File. Depending on what is added to a lift, a CDF will need to be installed.
Technical Troubleshooting
Posted:
8 Apr 2025 23:39
by
Pistolpeted
Hi fish
My dash doesn't have the asterisk key
It's a standard dash
Also what does the CDF stand for...
Technical Troubleshooting
Posted:
8 Apr 2025 23:16
by
Dave_Barclay
Hey Mathew
Thanks for reply i figured it out, it was a auction unit and someone had the wiring shifted...
Technical Troubleshooting
Posted:
8 Apr 2025 23:10
by
Dave_Barclay
Hi Started out with code 2 no communication, checked wiring up to PCU and tested fine. Pulled lower ECU and...
Technical Troubleshooting
Posted:
8 Apr 2025 22:14
by
Fishmech
LeMinh,
51 - operator pressed emergency button multiple times.
52 - No communication between traction and tiller. Suspect tiller cable or connection...
Technical Troubleshooting
Posted:
8 Apr 2025 21:52
by
Fishmech
Pistol,
Looking at the CT's we have, they use a dash display that you can enter a password. Turn the...
Technical Troubleshooting
Posted:
8 Apr 2025 20:37
by
Pistolpeted
Thanks fish for all the info,
So I have a rental unit that is the same model
And that one...
Technical Troubleshooting
Posted:
8 Apr 2025 08:30
by
Ayoub_Haddadi
When pressing joystick fingertips the truck not shifting any help please,?
It shows A3344 error code on display.
Technical Troubleshooting
Posted:
8 Apr 2025 06:17
by
snax31
Hi there fish, thanks for clarifying the dual fuel setup.
I just was wanting to make sure that petrol was...
Technical Troubleshooting
Posted:
8 Apr 2025 03:12
by
Nick_Grubb
I have the service manual that covers 7400-7440 series. It won't have part numbers but will show you how the...
Technical Troubleshooting
Posted:
8 Apr 2025 01:00
by
frits_f
Did you have error codes and did they dissapear after rinsing?
If no errors: check the status codes. That might...
Technical Troubleshooting
Posted:
8 Apr 2025 00:49
by
RALPH_GALINDO
Nick,
My tech was looking for blow up of all components associated with the caster assembly.
Technical Troubleshooting
Posted:
8 Apr 2025 00:25
by
Nick_Grubb
what is it you are looking for on the diagram
Technical Troubleshooting
Posted:
8 Apr 2025 00:04
by
Fishmech
William,
Sorry, I failed to mention, the switch over for this lift is probably a mechanical switch. Newer lifts may...
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.