Showing items 201 - 220 of 111,457 results.
Technical Troubleshooting
Posted:
10 Apr 2025 07:22
by
Petar_Corluka
Yes there is a keypad with numbers 1-9 and when I need to turn on the forklift i need to...
Technical Troubleshooting
Posted:
10 Apr 2025 07:12
by
Syed
You mean there is a keypad on the truck where you put the 3 digit code to switch on the...
Technical Troubleshooting
Posted:
10 Apr 2025 07:08
by
Syed
I can't find the error detail. Can you please recheck the error code? Also share the serial number
Technical Troubleshooting
Posted:
10 Apr 2025 06:48
by
Casey_Swoboda
Curious if anyone else has had this problem. The picker once you get to moving platform starts to shake causing...
Technical Troubleshooting
Posted:
10 Apr 2025 06:39
by
Petar_Corluka
I doesn't show show error code. When i try to put turn it on on pad with numbers , number 1...
Technical Troubleshooting
Posted:
10 Apr 2025 06:29
by
Alexey_Potekhin
What are the 3 numbers on the screen? Most likely it is an error code.
Technical Troubleshooting
Posted:
10 Apr 2025 04:24
by
Tanel_M
It fails self test, check for incoming voltages from battery, before and after contactor.
Technical Troubleshooting
-
Jungheinrich EJC212
-
Hello
Posted:
10 Apr 2025 04:23
by
Tanel_M
Tiller positions sensor probably, remove hood and check cable looms and microswitches.
Technical Troubleshooting
Posted:
10 Apr 2025 03:52
by
gary_mckenna
where should i start see no code about it
Design & Engineering
Posted:
10 Apr 2025 02:23
by
Tony_Rai
Where is the diode for this? Is it built into the TCM
Thanks in advance
Technical Troubleshooting
Posted:
10 Apr 2025 01:36
by
willj
Having issues with the forks rotating. When rotating the thumb wheel about 10 degrees left or right the forks will...
Technical Troubleshooting
Posted:
9 Apr 2025 22:13
by
Zeeker
Is there anyway to access the menu to clear codes without knowing the password? 55555 did not work and I...
Technical Troubleshooting
Posted:
9 Apr 2025 22:11
by
Zeeker
When this code is present is it normally just a bad anti-stall coil or are there typically other issues? Also...
Technical Troubleshooting
Posted:
9 Apr 2025 22:04
by
Petar_Corluka
Hi, guys. Sorry for my bad english.
I am a owner of Jungheinrich EJC212 2008 year and couple days ago...
Safety & Training
Posted:
9 Apr 2025 19:38
by
johnr_j
Depending on the product(s) being being handle there a various load stabilizing attachments that may be helpful.
Safety & Training
Posted:
9 Apr 2025 19:35
by
johnr_j
Depending on the product(s) being being handle there a various load stabilizing attachments that may be helpful.
News & Perspectives
Posted:
9 Apr 2025 19:18
by
johnr_j
Looks like that rascal of many names has developed that old tried but almost true evasive submarine tactic of "run...
Technical Troubleshooting
Posted:
9 Apr 2025 17:35
by
steveo
Hi
Under parameters and settings on AUX Hyd the settings are
aux 3 at 0 and aux 1 set to...
Technical Troubleshooting
Posted:
9 Apr 2025 17:34
by
steveo
Hi
Under parameters and settings on AUX Hyd the settings are
aux 3 at 0 and aux 1 set to...
Technical Troubleshooting
Posted:
9 Apr 2025 15:44
by
michel_v
set aux 3 to 0 and aux 1 to 50%
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.