I have a problem with an ac drive Cesab Blitz / BT cargo electronic park brake.
When the machine stops it holds on the park brake then will release and roll for about 2 seconds until the hydraulic motor stops then the brakes apply again.
I checked the stop on ramp setting and that was active
I swapped the park brake release pump from a good truck still the same.
I also swapped the brake solenoid and valve no improvement.
I am wondering if it's a mechanical problem with the park brake I can see the axles have been apart due to amount of sealant around the joints.
Customer had no t noticed a problem until a trainer came in.
Any ideas please.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.