ITA FORGES REGULATOR RELATIONSHIP

News Story
- 25 Mar 2004 ( #150 ) - WASHINGTON, DC, United States
2 min read
The Industrial Truck Association (ITA) has improved regulator relationships, considered becoming a standards-developing organisation and gained greater insights into automotive industry needs.

ITA president Dirk von Holt gave a state-of-the-association report yesterday during the association's 53rd annual spring meeting in Washington. Mr von Holt is president of Jungheinrich Lift Truck Corp USA and Multiton MIC Corp/Jungheinrich, both of Richmond, Virginia.

"Our initial plans for an alliance with the Occupational Safety & Health Administration (OSHA) are going [well]. We have already established common links on operator training and rules and regulations [for] young people operating industrial trucks. We are very near to establishing a link to a revised daily checklist," he said.

Mr von Holt expressed confidence in working with OSHA on other issues such as lock out/tag out and lifting in unison. ITA's "executive committee has established a task force on this, and I am confident we will be able to reduce the number and severity of accidents by working together", he said.

ITA could become a standards-developing organisation under the auspices of the American National Standards Institute. "It is clear that the American Society of Mechanical Engineers will drop the sponsoring of some standards, and we want ITA to step in," Mr von Holt said. "This is our industry, and we need to maintain our leadership role."

ITA has played a key role in developing standards governing forklift safety in Canada, he said.

ITA was exploring how to deal with the imposition of duties on USA-originated parts and industrial trucks heading to Europe and what to do, if anything, about the "incredible increase in the cost of steel and steel products".

ITA has established a close relationship with the Automotive Industry Action Group (AIAG) to gain insights to AIAG's efforts to develop best practices for suppliers to the automotive industry.

ITA reported 2003 receipts of USD1.82 million, expenses of USD1.806 million and a balance in the cash reserve fund of USD320,000, "an amount we believe is adequate for an organisation of ITA's size", Mr von Holt said.

ITA holds its annual meeting from October 23 to October 26 in Miami, Florida, and will host the Alliance of Industrial Truck Organisations, consisting of the management committees of the ITA, European Federation of Materials Handling and the Japan Industrial Vehicles Association.
Briefs
Briefs 3 Jul 2025 - 1 min read
AITT issues reminder on need for certified training
AITT issues reminder on need for certified training 26 Jun 2025 - Hugglescote, United Kingdom - 1 min read
Previously about:
National Forklift Safety Day shines a light on workplace culture News Story - 12 Jun 2025 - Washington, D.C., United States - 1 min read
US and UK to mark Forklift Safety Day News Story - 6 Jun 2024 - 1 min read
Materials handling industry marks safety day News Story - 15 Jun 2023 - 3 min read
Tyre company cited after death News Story - 12 Dec 2024 - Fort Worth, TX, United States - 1 min read
OSHA reaches settlement over telehandler fatality News Story - 6 Jun 2024 - Linden, NJ, United States - 2 min read
Forklift death at Port of Los Angeles News Story - 21 Mar 2024 - Los Angeles, CA, United States - 2 min read
Do you have materials handling news? Submit your news here
Inside The News
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading

Even the heaviest lifts must be easy to handle. That’s why N.C. Nielsen raises the bar in lifting capacity, maneuverability, operator comfort, flexibility and technical capabilities.
Heavy duty reach stackers – lifting capacity from 85 to 180 tons.
VIEW ALL OUR CUSTOM-BUILT HEAVY DUTY REACH STACKERS

Contact us now: +45 99 83 83 83 - www.nc-nielsen.com

Words of support …

These releases in Forkliftaction are a nice experience for SNDC... We got seven inquiries coming from Canada, USA, Mexico, Israel and Australia (five from retailers, two from machines manufacturers) and we are still in contact with them. I can state that's a success story!

David Massat, Sales Director OEM and Export

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Even the heaviest lifts must be easy to handle. That’s why N.C. Nielsen raises the bar in lifting capacity, maneuverability, operator comfort, flexibility and technical capabilities.
Heavy duty reach stackers – lifting capacity from 85 to 180 tons.
VIEW ALL OUR CUSTOM-BUILT HEAVY DUTY REACH STACKERS

Contact us now: +45 99 83 83 83 - www.nc-nielsen.com

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Even the heaviest lifts must be easy to handle. That’s why N.C. Nielsen raises the bar in lifting capacity, maneuverability, operator comfort, flexibility and technical capabilities.
Heavy duty reach stackers – lifting capacity from 85 to 180 tons.
VIEW ALL OUR CUSTOM-BUILT HEAVY DUTY REACH STACKERS

Contact us now: +45 99 83 83 83 - www.nc-nielsen.com