Have a hyster S40XM that will not start in the mornings unless you put you hand over the air intake side of the carb an choke it down. After that it starts every time. The LPG regulator ,the LPG filter ,and the diaphragm in the carb has been replaced. Any ideas on what may be my problem?
Showing items 1 - 8 of 8 results.
Update on hyster s40xm not starting cold. we installed new coil thought fire looked a little week ran for about 2 hrs shut off. replaced the diaphragm in the carb. started right up ran ran about 4 hrs shut off. any ideas of what direction we should go would be greatly appreciated
No spark plugs but have replaced the distributor cap ,rotory button, spark plug wires ,and pick up module.
The regulator was a SYLP7000 COBRA REGULATOR
What regulator did you install (part number) ? New spark plugs too?
Have you checked the valve adjustment? Tis can effect the starting cold.
serial number is D187V17377X
What is the serial number.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.