Need help, we bought a used Yale Pallet jack. It came with a charger Model #3YN12-550. The charger is currently set for 480 volts but we only have 208 volts coming into our building. Two electricians have asked us for a wiring diagram and we can't find one. Can anyone help? It may be Spec #YRK66784 (I found that number on the internet). Thanks for any help!
Showing items 1 - 5 of 5 results.
We are electrician and provide all types of commercial and residence services to our costumers we have the group of certified and experienced electricians. I can help your after a visit.
Hi,
Also Looking for a manual for a Yale/ ( Oldham ) Apex charger.
A 72v / 80A model , know this is an old thread but was wondering if you have come across one in your travels?
(This charger has a logic board on inside front panel with a couple of configurable settings via pin blocks).
Any info on this charger would be appreciated!
Is it an intelligent charger or just a timed one?
Put your e-mail address in your profile. (it won't show up if you put it in a post)
I have a few customers with Yale chargers. I'll see if one has a book inside on my next call to one of them. Sorry, that may be a week or so away.
Hopefully nobody will have stolen the installation guide. I always leave them for the next guy.
Yes, it's Yale. We have had two electricians in to change the voltage and they can't find a diagram.
Is there a manufacturer name on the charger......is there a data plate on it? Some dhargers have a diagram inside or even a manual stored inside for just such things
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.