Discussion:
error code CO

have a 5FBCU15 with no forward and a code on the dash display "CO"
  • Posted 24 Jun 2014 22:30
  • By 67Malibu
  • joined 20 Feb'14 - 18 messages
  • Oklahoma, United States
Showing items 1 - 2 of 2 results.
I had this issue with the MS contact was engaged I tapped it and disengaged. I replaced the tips and two months later happened again. Tips are not welded but Im thinking the plunger is getting stuck. Any ideas?
  • Posted 2 Jun 2015 11:33
  • By crown619
  • joined 28 Aug'14 - 26 messages
  • California, United States
CO covers the complete drive circuit.

1. Does the code appear with key on or once you start traveling?
With key on: I would look a the MS contact tips make sure they are not welded. Then trouble shoot the SIT's for the drive circuit.
2. Does the code appear with travel attempted?
If it does not come on till you attempt to travel you should start with the forward/reverse contacts then the cables to the motor and then the motor. Looking for an open or shorted circuit.
  • Posted 25 Jun 2014 11:02
  • By Bulldog965
  • joined 15 Oct'09 - 63 messages
  • Indiana, United States
Richard

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

SMV (Konecranes) 4632CC5
Balling, Denmark
New - Sale
SMV (Konecranes) 4632CC5
Balling, Denmark
New - Sale
Fact of the week
Allodoxaphobia is rare social phobia, an intense and irrational fear of other people's opinions. It goes beyond typical social awkwardness or shyness and can significantly impact a person's life.