1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. TRANSMISSION TO WORKING, FORWARD OR BACKWARDS

Discussion:
TRANSMISSION TO WORKING, FORWARD OR BACKWARDS

How do I trouble shoot the transmisson?
Could it be the valve body?
How do I remove the valve body?
How do check the valve body pressure?
  • Posted 16 Sep 2011 13:22
  • By scott_a
  • joined 16 Sep'11 - 3 messages
  • Kansas, United States
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
Sounds like the level is low. I would try adding a quart and see if it starts moving again.
  • Posted 21 Oct 2017 11:54
  • By mrfixit
  • joined 11 Dec'08 - 1,434 messages
  • New York, United States
Post a ReplyReport this post
Can someone anyone help me?
I have a Hyster H40XL model and or serial number #A177832512K and the problem I have is it will not move on its own power but yet everything else works fine! the fluid on the trans dipsticks is redish brown and looks like it has bubbles in it! or foam so to speak! with it running I removed the filter that is on top of valve body and nothing just small slow bubbles!on outside ring of the filter area! Any help is much thanks!
  • Posted 21 Oct 2017 07:19
  • By thomas_w
  • joined 21 Oct'17 - 1 message
  • Georgia, United States
Thomas
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
Brussels Airport in Belgium, Europe is the world's largest sales point for chocolate, with over 800 tonnes of chocolate sold annually. This averages out to about 1.5 kilograms sold every minute.

PREMIUM business

VETTER Forks, Inc.
The world's most comprehensive product range as well as the most intelligent sensor fork for more safety and efficiency.
VETTER Forks, Inc.
Movers & Shakers
Jim Tompkins Jim Tompkins
Jim Tompkins
Chairman of the board, Tompkins Solutions
Nathan Riggins
Director of government affairs, Associated Equipment Distributors
Todd J Doxsee
National dealer development manager, Castle Equipment Company
Alt Haider
Sales operations, Heli
JLG 600AJ
JLG 600AJ 2012
Flesherton, Ontario, Canada
Used - Sale
Crown SX3030TT4250
Crown SX3030TT4250
Braeside, Melbourne, Victoria, Australia
Hire
|

Showcased in the Virtual Expo

From the forum discussions …
"Hyster J5.0XN: new battery replaced and it gave this fault code 3330270.... pls any idea , thanks"
northstar, Ghana
Read & Post in our Forums
Movers & Shakers
Jim Tompkins Jim Tompkins
Jim Tompkins
Chairman of the board, Tompkins Solutions
Nathan Riggins
Director of government affairs, Associated Equipment Distributors
Todd J Doxsee
National dealer development manager, Castle Equipment Company
Alt Haider
Sales operations, Heli