problem steering - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
problem steering

Linde H35T

Problem steering, turning goes very heavy.
Changed steering valve, no improvement.
took of the pump, got it tested, is ok.
put the pump back steering ok, but after 5 minutes of steering problem occures again. steering again very heavy.

Any suggestions ore ideas?

Posted 14 Sep 2023 01:39
By makkebear
joined 14 Sep'23 - 3 messages
Netherlands

Post a Reply Report this post

Showing items 1 - 5 of 5 results.

Sort messages by:

Try to operate full lift and steering if steel.hard to steer.

Posted 29 Sep 2023 15:35
By Rolando_Babista
joined 29 Sep'23 - 1 message
Bahrain

Rolly

Post a Reply Report this post

It does at all rpms

Posted 18 Sep 2023 23:11
By makkebear
joined 14 Sep'23 - 3 messages
Netherlands

Post a Reply Report this post

Did not do that yet, will replace the filter, already replaced high pressure filters.

Posted 18 Sep 2023 23:09
By makkebear
joined 14 Sep'23 - 3 messages
Netherlands

Post a Reply Report this post

Check the filter in the hyd tank. I had one that had a similar problem. It was the oring that was damaged arround the outside of the filter.

Posted 17 Sep 2023 21:19
Modified 17 Sep 2023 21:40 by poster
By andrew_k
joined 17 Mar'07 - 325 messages
England, United Kingdom

Post a Reply Report this post

Does it steer hard at idle only or all rpms.

Posted 17 Sep 2023 08:32
By IFD45
joined 28 Feb'13 - 31 messages
Wisconsin, United States

IFD45@mail.com

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.