Showing items 104,061 - 104,080 of 112,345 results.
Maintenance & Troubleshooting
Posted:
18 Dec 2008 23:57
by
BusyE
I am looking for the information on code E01-63. This Toyota turns on the check engine light after 1 to...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 23:27
by
Prentice
Hello BusyE, I Don't think there is laptop software but they do have a handheld analyzer. What do you need...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 22:09
by
sean_m
Anything at all? Anyone?
Maintenance & Troubleshooting
Posted:
18 Dec 2008 21:28
by
Leon_W
Is ther an autofill cap manufacturer in the UK, i need to buy about 150 caps but they seem quite...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 16:24
by
Ulieta
Hi everyone!
Please help me someone! We've bougt a used BT reach truck of 1999 year (2,5 tones, 9 meters)...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 14:41
by
BusyE
Can any one tell me if I can get a laptop diagnostic software and cable for this unit or can...
News & Perspectives
Posted:
18 Dec 2008 13:11
by
proshadetree
Hey Ed stop by and give me a lift,Ill pay gas.Dont think they like it when I drive the van...
News & Perspectives
Posted:
18 Dec 2008 09:53
by
edward_t
Which branch should all the new techs show up at tomorrow? :-)
News & Perspectives
Posted:
18 Dec 2008 08:38
by
proshadetree
To bad it isnt in tennessee.Lot of guys going home early.Dont look good.
Maintenance & Troubleshooting
Posted:
18 Dec 2008 07:52
by
rich_k
Yeah, or somethings is jammed in there by the tilt cylinder, Thanks Cooter
Maintenance & Troubleshooting
Posted:
18 Dec 2008 06:23
by
Cooter
Code 64 is a Tilt solenoid 1 abnormality.
The tilt solenoid should be aprox 10 ohms at the solenoid.
If...
News & Perspectives
Posted:
18 Dec 2008 05:13
by
BleedGreen
bigGlittlestar
My name is Larry Allen, I am one of the owner of Clarklift of Florida, and although times are...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 04:57
by
elektrodrive
Sorted. Thank You everyone...Seems like a bad wiring from the end stop switch to the controller. Thanks once again..those...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 04:33
by
DAMO
NO i didnt set the steer pot sven i will now...thanks for the dig out if i can help...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 04:03
by
turbocabrio
Hi,
did you reprogram the Steering Potentiometer to the Controllers? you have to set the Endpoints LEFT / RIGHT an...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 03:59
by
DAMO
Sven thanks for taking the time out to explain its much appriated.....I put a new controller in today [extream...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 03:48
by
turbocabrio
Hi,
ok now the simple things are gone. Just to check again:
1. Endswitches ok?
2. Steering Electronic was checked?...
Maintenance & Troubleshooting
Posted:
18 Dec 2008 03:42
by
turbocabrio
Hi,
yeah the Thing with the gray Key (Number 738) is right but you dont need it really. You only...
Maintenance & Troubleshooting
Posted:
17 Dec 2008 21:27
by
edward_t
not _ONLY_ thing, but far most likely thing.. and if the battery is low, you should fix that part first...
Maintenance & Troubleshooting
Posted:
17 Dec 2008 21:25
by
edward_t
ask a cat tech to look? How do you change directions? (with a foot control or lever?) what does the...
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.