Showing items 100,961 - 100,980 of 111,555 results.
Technical Troubleshooting
Posted:
27 Apr 2009 23:52
by
allan_l
thanks
wht presure do u want me to set (PSI /BAR) , We have fixed new pump i dont find any...
News & Perspectives
Posted:
27 Apr 2009 22:05
by
marc_a
I started as a Field, maintenance and repair Tech. last year with my service van. Now i have a shop...
Design & Engineering
Posted:
27 Apr 2009 21:14
by
johnr_j
Agree with the comments from Justinn & Edward T. Would like to add a couple additional comments. When your in house...
Technical Troubleshooting
Posted:
27 Apr 2009 20:49
by
edward_t
there will either be a relief valve at the main hyd. control valve or on the pump, (most forklifts it's...
Technical Troubleshooting
Posted:
27 Apr 2009 20:32
by
allan_l
hi edward
thanks for you reply
should i set the relif valve which is on the control valve if so...
Technical Troubleshooting
Posted:
27 Apr 2009 20:21
by
edward_t
correctly set the hydraulic pressure relief.
Technical Troubleshooting
Posted:
27 Apr 2009 16:01
by
rick_r
Our forklift only displayed Error F1 twice when someone tried using the sideshifter control without it being 'Connected'!
Design & Engineering
Posted:
27 Apr 2009 15:58
by
angelica_l
Can anyone provide for the specs of RD3000. Thanks.
Design & Engineering
Posted:
27 Apr 2009 10:07
by
jeremy_s
WC is the nominal outlet pressure
You can get convertres with different secondary springs.
Standard Cobra=
Blue spring: -0.37 kPA...
Technical Troubleshooting
Posted:
27 Apr 2009 07:08
by
excon
error code 65,and ASA light ,can someone help,thanks.
Technical Troubleshooting
Posted:
27 Apr 2009 00:07
by
allan_l
Hi guys
I have cat f/l DP70 ,hysdraulic oil is over heating approx (80-90') all the piston rod's colour has...
Business management
Posted:
26 Apr 2009 22:01
by
johnr_j
Raymond,
It is typical that with new tech few people want to be the first to buy - maybe 5-8% of...
Technical Troubleshooting
Posted:
26 Apr 2009 21:04
by
kevin_k
your digging in the right place mate. you need to adjust that pot so that tha start voltage is below...
Safety & Training
Posted:
26 Apr 2009 00:39
by
DAMO
Heading for a few this evening....... u have the weather we have the guinness......trow another shrimp on the barbie
Technical Troubleshooting
Posted:
25 Apr 2009 22:11
by
edward_t
this unit may well have an external resistor coil, and the resistor has gone bad.(sometimes these burn up when the...
Safety & Training
Posted:
25 Apr 2009 20:09
by
paddyB
sadly the REAL waterford crystal is no more, if you have some hold onto it because its machine made now...
Technical Troubleshooting
Posted:
25 Apr 2009 15:01
by
fixitandy
sounds like a faulty key switch, you said that you tested the current in the run position, but I think...
Design & Engineering
Posted:
25 Apr 2009 14:54
by
fixitandy
I have found reverse bleeding to be the best way to bleed most clark brake systems. I do it similar...
Design & Engineering
Posted:
25 Apr 2009 14:46
by
fixitandy
there was not a coolant circulation problem on this engine, and model Js are still available, they just don't have...
Business management
Posted:
25 Apr 2009 13:14
by
Raymond
Absolutely, it will. Sad fact is that most if not all buyers will not shell out the coin to turn...
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.