Showing items 100,901 - 100,920 of 111,556 results.
Design & Engineering
Posted:
1 May 2009 03:38
by
kevin_k
what serial number prefix is your truck justin. D160/G160 or J160.
g160 is best setup with the laptop , j160 can...
Technical Troubleshooting
Posted:
1 May 2009 02:55
by
Jeff
The regulator does not cause the injector to fail. However excess build up of tar in the regulator can overflow...
Technical Troubleshooting
Posted:
1 May 2009 02:46
by
TimM
Can anyone tell me what would cause this travel fault. When attemptimg reverse the unit bucks and goes in to...
News & Perspectives
Posted:
1 May 2009 02:10
by
alan_m
Dont sign the piece of paper,employment rights act says that if you do not give them permission they cannot take...
Business management
Posted:
1 May 2009 01:55
by
killer_rabbit
You might want to send your equipment list with specs to a few wholesalers. That is about the only way...
Business management
Posted:
1 May 2009 01:51
by
killer_rabbit
To set your standard hourly labor rate look to get about 4 times what you are paying your tech or...
Design & Engineering
Posted:
1 May 2009 01:04
by
justinm
yeah i tried turning it to about 2.23v and 2.07v either way and got the same result (with center being...
Design & Engineering
Posted:
1 May 2009 00:40
by
ben_g
Hi justinm,
I had same problem on the same truck I was able to fix it by jacking up steer...
Design & Engineering
Posted:
1 May 2009 00:31
by
justinm
try midwest directional (816) 796-6400
or one of the forklift boneyards
that one might be tough to find used though...
Design & Engineering
Posted:
1 May 2009 00:18
by
justinm
hey guys
getting code 212 (pot volts too low, r/s controller) when the steering is deaded to the right side...
Design & Engineering
Posted:
30 Apr 2009 23:38
by
Nuna
Dear all Still Experts,
I have the canbus cable which use for connecting to the FMx reach truck (AC version...
Business management
Posted:
30 Apr 2009 23:07
by
JDBurton
Ok guys no doubt times are tight and everyone is looking at their model and trying to hunker down until...
Safety & Training
Posted:
30 Apr 2009 20:19
by
edward_t
In the USA, it often appears to me that our 2 party political system creates a great deal of ambiguity...
Storage & Handling
Posted:
30 Apr 2009 18:51
by
derek_h
Surely the relief pressure on the lift is set higher than it should be ?
I would imagine that your employers...
Design & Engineering
Posted:
30 Apr 2009 18:42
by
dozer
Food for thought. I just rebuilt a toyota 5S 3w gearbox. Box was noisy and when I turned the tire...
Design & Engineering
Posted:
30 Apr 2009 18:32
by
Expert
Who is interested in catalogue for Still 8.9 write me to: service-manual at list dot ru
exchange is possible.
Safety & Training
Posted:
30 Apr 2009 17:38
by
derek_h
In my opinion, I think the government here likes to show that they are serious regarding all safety issues but...
Technical Troubleshooting
Posted:
30 Apr 2009 14:35
by
marc_a
I removed the chains and the carriage lowers with no problem, the cilinder does not lower i disconnect the hidraulic...
Safety & Training
Posted:
30 Apr 2009 10:49
by
paddyB
Hi,
In your opinion.
Do you think your government is seroius about forklift safety and doing enough to promote safety...
Technical Troubleshooting
Posted:
30 Apr 2009 10:29
by
Jan_Haayer
used this info today with a LPG truck, did not fix the problem but it did help rule out some...
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.