Showing items 98,141 - 98,160 of 111,670 results.
Technical Troubleshooting
Posted:
5 Nov 2009 12:26
by
MagnasoN
With 12000 hours... Could be a few things.... bad injector , or the fuel filters are clogged. Dont try to clean...
Design & Engineering
Posted:
5 Nov 2009 10:11
by
willie1006
If you are refering to the canbus to usb adapter I know a place where you can purchase one
kanda.com/products/Lawicel/CANUSB.html
Design & Engineering
Posted:
5 Nov 2009 10:06
by
willie1006
You may want to drain the oil from the vaporizer, there is a drain plug on the side torward the...
Technical Troubleshooting
Posted:
5 Nov 2009 09:39
by
greasespoon
truck has gone into slow mode like the safte mode is on but hydralic working ok but fault codes are...
Design & Engineering
Posted:
5 Nov 2009 09:27
by
greasespoon
nissan engine use a quite std filters for there engine
crossland numbers fuel 370 or 5013 oil 2029/694 or 2048...
News & Perspectives
Posted:
5 Nov 2009 09:06
by
lifter01
EasyM im not talking about the situation in the usa im looking at it from a euopean point of view...
Design & Engineering
Posted:
5 Nov 2009 07:55
by
markg
can anyone help me with fuel/oil filter part numbers for a nissan fgj02 circa 1995 with a td 27 engine,also...
Design & Engineering
Posted:
5 Nov 2009 07:44
by
garland_m
The Trim injector is for idle conditions. The coil should read 3.5-4.5 ohms. Connect 12 volts to injector and you...
Technical Troubleshooting
Posted:
5 Nov 2009 07:42
by
johnmowcop
I bought forklift truck (Toyota 7FGF25. Year 2002) at auction, it ran ok and started fine. When I went to...
Design & Engineering
Posted:
5 Nov 2009 06:27
by
fixitandy
is this a 5000 or 5200 series RR? If the forks are tilted full up or down it will give...
Design & Engineering
Posted:
5 Nov 2009 06:21
by
fixitandy
I'm working on a yale glc040vxnv (LPG fuel only) that is giving service code 522655-1, running lean in closed loop...
News & Perspectives
Posted:
5 Nov 2009 05:16
by
chublil
Something I forgot to mention was the electric lines offered by both brands a really different from one another. Both...
News & Perspectives
Posted:
5 Nov 2009 05:12
by
Iceman
To one and all. Hyster New England was not the first to fall. A group of smaller Hyster & Yale dealers...
News & Perspectives
Posted:
5 Nov 2009 05:11
by
chublil
EasyM, lets not forget the engine varibles along with the differences in the L.P. systems, as well as the hydraulic...
News & Perspectives
Posted:
5 Nov 2009 04:43
by
EasyM
Lifter, from 3,000 lbs - 36,000 lbs capacity, the Yale is a Hyster and vice versa. Most customers know that these...
News & Perspectives
Posted:
5 Nov 2009 04:37
by
lifter01
Sorry about the confusion but what Andy said is what i was getting at. If Nacco did away with the...
Technical Troubleshooting
Posted:
5 Nov 2009 04:24
by
oilslicknick
Hi keith thanks for the list of zappi error codes. Have we met in the past?? I used to work...
Design & Engineering
Posted:
5 Nov 2009 02:20
by
J_Newton
Display works fine through pretest or in technician mode, no error codes, but after self test display reads "Monitor Disabled"
News & Perspectives
Posted:
5 Nov 2009 01:49
by
grant_f
good boys!SHAME
Design & Engineering
Posted:
5 Nov 2009 01:44
by
notoriousDUG
I know it seems like a waste but check the oil pressure itself first, often you can find the O/P...
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.