1. Home
  2. Forums
  3. Report post

Report this forum post

I am currently working with the above mentioned unit and am continually having issues with the hyd pump,belts and pulley..whether its noise or the belts continually flying off. Is there any relief pressure setting on the pump itself and where is such adjustment point located? What psi is it to be set at if indeed it is adjustable on the pump.Any help would be appreciated and If I can offer any help in return Im more than willing. sn#P353729
  • Posted 29 Aug 2012 02:28
  • By ray_k
  • joined 1 Jul'10 - 39 messages
  • Ohio, United States
RAYK@MIDOHIOFORKLIFT.COM

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Forklift Diaries
From the forum discussions …
"Toyota 8FGCU30 - thanks to several Techs- Also check the diaphragm in the mixer, have seen a lot that stick and cause the same issue"
John_Bradley, United States
Read & Post in our Forums
Fact of the week
Sourdough bread contains Lactobacillus reuteri, a probiotic bacteria. During pregnancy and breastfeeding, these bacteria can travel from the mother's colon to her breast tissue and be passed to the infant through breast milk. It offers various health benefits, including potential protection against breast cancer.
Crown Equipment celebrates 80 years New Bremen, OH, United States
Global Industry News
edition #1236 - 26 June 2025
As June comes to a close, the month when our sector recognises National Forklift Safety Day , the United Kingdom’s Association of Industrial Truck Trainers (AITT) has issued a timely reminder of the need to ensure any staff training is fully accredited... Continue reading
Your Focus
Carlos Mendes
Custom or standard? Choosing the right relay for the job
Carlos Mendes
Read blog
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution
Komatsu FD25T17
Komatsu FD25T17
Braeside, Melbourne, Victoria, Australia
Hire
Crown WP302020
Crown WP302020
Braeside, Melbourne, Victoria, Australia
Hire
|
Your Focus
Carlos Mendes
Custom or standard? Choosing the right relay for the job
Carlos Mendes
Read blog
From the forum discussions …
"Unicarriers - it would have to be for a dual fuel unit also. Usually a bad cam or crankshaft sensor will throw a E-27 or a E-28 code on the dash panel... If it does not light up and the bulb is bad then it will not start also."
mwjago, United States
Read & Post in our Forums
Movers & Shakers
Jeannette Walker Jeannette Walker
Jeannette Walker
CEO, MHEDA
Stéphane Hénon
President, European Rental Association (ERA)
Tejal Ranjan
Chief marketing officer, JLT Mobile Computers
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing