Hi Swoop223,
I'm back; I was gone for a few days.... Now back to my Scissor lift
When I told you the pressures were good I did not check them at the test ports the place I checked the pressures was right at the discharge of the pump and each section was 3500+....
I just now checked the pressure at the test port 1 and test port 2 and here's what I found, test port 2 was 3500 PSI going forward or reverse and test port 1 was 600 PSI going forward or reverse... it sounds like something is up with port 1? Yes?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.