Thx for the info swoop, I still have a few questions...
The cable through The mast to the coils checked out.
The cable has only three wires, one constant power and two activation wires to ground. I have only 6volts at the coils on sideshift and on reach ( I assume since there is not a 4th wire for the tilt then the coils must be in a neutral position for the tilt to work )no power to the pentograph for tilt when selected but this is the only function that works even with the control cable in the mast disconnected.
The coils indicate they are 24v, why would I only have 6v?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.