1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Driving problem, something is stoping drive

Discussion:
Driving problem, something is stoping drive

Hello everyone,

we have some problem with Hyster R1.6H. Forklift driving but it stops and it's seems like something stoped him.

We have change all bearings in axle, bearing on drive motor sensor bearing. Brake is ok.
  • Posted 18 Nov 2016 19:12
  • By matej_b
  • joined 30 Apr'15 - 14 messages
  • Medimurje, Croatia
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
is there a error code on dash or in error log.
you can remove electric magnetic brake and put on floor where operator feet are while still connected to wiring harness. then jack unit of ground and drive unit to see if at full speed. if not the encoder for drive motor could be u/s. by the way if encoder is fitted wrong by pushing on the out side it will properly no good. it could be the traction controller playing up. swap the hydraulic controller with traction.
  • Posted 25 Nov 2016 01:51
  • By redbull
  • joined 14 Oct'16 - 108 messages
  • Queensland, Australia
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

TOC Europe wraps up Rotterdam, Netherlands
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ
From the forum discussions …
"Congrats to Afshin who was the second person to use the new photo system on the Forums. Click on the photos to see them enlarged. Afshin writes: "I have a error code 06-03 in Toyota 8FG30...""
Afshin, Iran, Islamic Republic Of
Read & Post in our Forums
TOC Europe wraps up Rotterdam, Netherlands
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution
Forklift Diaries
From the forum discussions …
"Congrats to the first person to use the new photos in the forums - Darek_S says: "I attached a couple photos of the valves I visually inspected (Toyota 7FBEU20). I followed the pressure line to the flow regulator valve...""
darek_s, United States
Read & Post in our Forums
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution