1. Home
2. Forums
3. Design & Engineering

Discussion:
cat. g5000 code 27. n all indicator lights flshing

cat c5000 with code e-27 showing. truck start. running like misfire. i did changed sparkplug n check all hv good spark.

got 12v. does any coil pack need change?

anyone can give me any idea to clear these code n flashing lights. or still hv other problem need done? plz thx all

• Posted 27 Aug 2009 00:13
• Modified 27 Aug 2009 02:00 by poster
• Discussion started by jonip
• Ontario, Canada

Post a ReplyReport this post

spark plugs (usually the most common cause)
POS Sensor
bad wiring at coil packs (connectors)

anything that faults in the ignition circuit can trigger this code
to clear this code use diagnoser or do the pedal dance

• Posted 5 Sep 2012 20:26
• Reply by swoop223
• North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Truck would also code 27 in one of the coil packs was dead.

• Posted 5 Sep 2012 11:34
• Reply by LTRM
• Illinois, United States

Post a Reply Report this post

Code E-27 is refered to the ckp(crankshaft position sensor)
but this code appear when you are instaling bad spark plugs.
Try with original nissan plugas.
I hope this help.

• Posted 5 Sep 2012 09:52
• Reply by pastrana_j
• Puebla, Mexico

Post a Reply Report this post

i have the same please any help

• Posted 5 Sep 2012 07:35
• Reply by JHpantaleon
• distrito, Dominican Republic

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.