Code 524260-1 - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster 60:
Code 524260-1

Apparently this is a ground short issue. Looking for advice on where to start looking. This unit has multiple codes. Starts great, runs 30 seconds then shuts down. Throttle is unresponsive while running.

Posted 10 Jun 2022 01:19
Discussion started by Ed_Breen
Saskatchewan, Canada

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Go after the simple problems first.

Is the battery more than 3 years old ?

Is the battery maintenance free ? Or Lead Acid/might need water.

Is the bolt that secures the Negative cable loose or corroded ?

Posted 15 Jun 2022 17:46
Reply by LaGrange
Missouri, United States

Strong in mind, Strong in Health.

Post a Reply Report this post

You will have to follow the wire harness to see if you can find anywhere the 5v may have rubbed through and touching ground. Remember all 5v are the power to all sensors. They do break it up on to segments from vsm.

Posted 10 Jun 2022 10:05
Reply by TONY_DREIER
Texas, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.