Raymond OPC 30 TT: Error Code 2H - Design & Engineering discussion in Forkliftaction's forums

Discussion:
Raymond OPC 30 TT: Error Code 2H

Serial Number: 560-10-B10157

Travel Function barely works; very slow Travel Speed, Forward & Reverse.
The RPM's don't rise above zero, when using Test I 19.

I don't have an Encoder Bearing Tester.
Not totally sure that the Tractor Motor Sensor Bearing is bad.

Posted 20 Nov 2019 11:32
Discussion started by LaGrange
Missouri, United States

Strong in mind, Strong in Health.

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

I found the problem & did the repair right away, I think it was Thursday last week.

I can't remember what I did; did not have to replace the sensor or do any kind of a major repair.

Posted 28 Nov 2019 10:42
Modified 28 Nov 2019 10:42 by poster
Reply by LaGrange
Missouri, United States

Strong in mind, Strong in Health.

Post a Reply Report this post

I had a similar issue with my 30TT awhile back and it turned out to be the speed feedback sensor on the drive motor.

Posted 28 Nov 2019 07:30
Reply by Busch
United States

Never assume, assumptions are the mother of all ****ups. -Busch-

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.