Discussion:
D35S-7 Unable to Display Faults

How's it going guys. I have a Doosan D35S-7/(DS35S-7) that will cut to 50% power during operation and display CEL. Upon startup the CEL is not engaged, it only engages after operation. I am also unable to read a fault code for it. I have tried turning the ignition to "ON", not "RUN" and cycled brakes then tried accelerator within 5 seconds. I do not see any way to cycle through the diagnostics or display the fault codes so I can actually start troubleshooting this thing. I have the manual, just need a way to display the codes, thanks in advance.
  • Posted 3 Apr 2019 09:51
  • By Zaytech
  • joined 3 Apr'19 - 1 message
  • Hawaii, United States
Showing items 1 - 1 of 1 results.
There is no way to view the codes without the laptop and G2 Scan software.
  • Posted 15 Aug 2019 22:38
  • By sirthor1881
  • joined 15 Mar'11 - 24 messages
  • Georgia, United States

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

TOC Europe wraps up Rotterdam, Netherlands
Upcoming industry events …
October 6-9, 2025 - Detroit, MI, United States
October 6-9, 2025 - Detroit, MI, United States
November 14, 2025 - Melbourne, Australia
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
SNORKEL A46JE
Yokohama, Japan
Used - Sale
Toyota 8FGU25
Flesherton, Ontario, Canada
Used - Sale
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".