How's it going guys. I have a Doosan D35S-7/(DS35S-7) that will cut to 50% power during operation and display CEL. Upon startup the CEL is not engaged, it only engages after operation. I am also unable to read a fault code for it. I have tried turning the ignition to "ON", not "RUN" and cycled brakes then tried accelerator within 5 seconds. I do not see any way to cycle through the diagnostics or display the fault codes so I can actually start troubleshooting this thing. I have the manual, just need a way to display the codes, thanks in advance.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.