hello my trolley still R70-30 has the same problem it starts but does not want to move can you help me thank you
[email address removed]

Hi
what software to Still RX 70-30 517327002630?
or you can send a page from the book repair accelerator
Please kaalogowy number canbox?
greets Christopher
Krzysztof at a-service dot pl

Hi
what software to Still RX 70-30 517327002630?
or you can send a page from the book repair accelerator
Please kaalogowy number canbox?
greets Christopher
Krzysztof at a-service dot pl

Hi
what software to Still RX 70-30 517327002630?
or you can send a page from the book repair accelerator
Please kaalogowy number canbox?
greets Christopher
Krzysztof at a-service dot pl

Hello Christopher,

Are you sure that the pedal has micro switch?
Did you measured the potentiometer?

Supply:
X16/4 to X16/8 - 11,4 - 12,6 V
Pedal not actuated:
X16/4 to X16/3 - 5,3 - 6,6 V correction by turning the potentiometer
X16/4 to X16/2 - 5,3 - 6,6 V correction by turning the potentiometer
Pedal fully actuated:
X16/4 to X16/3 - 8,0 - 11,4 V correction by turning the support
X16/4 to X16/2 - 1,1 - 3,8 V correction by turning the support

Part no. for travel pedal is 0704357.

Need more help just ask but give me the serial number of the truck.

Best regards.

Welcome
looking for catalog number
accelerator
potentiometer accelerator pedal
microswitch
or maybe someone to share a book repair Still RX70-30
greets Christopher

Fault in accelerator. Throttle voltages do not match