Hi there,
I have the following problem with my Still (R20-16-#512010016206, yr2001).
It has a joystick, side shift isn't working anymore, lowering works, lifting only when I pull the stick very less (slow lift), do I pull more lifting stops.
Is it possible to read the postion of the joystick at the display? Does anybody have a service manual for this forlift?
I really appreciate your help!
Showing items 1 - 15 of 31 results.
Hi,
could someone please send me the service manual for RX20-16?
Thanks!
Good day Jacob!
What is your email?
Please write your visible mail without the signs or points.
Good day!
What is your email?
Please write your visible mail without the signs or points.
Dear Jacob,
can You send me this R20-19 manual?
Thanks
Ondrej
[email address removed]
Hi! We have an old r20-16 from 2002 and from one day to the other doesn't run. Can any one send us an electrical map of it? That manual would be nice to have...
Thank u in advance
Hello!,
I have a R20-16P still, serial number 512009007488, manufactured in 2000. This indicates error code 69, error code 195, brushes.
What should I change?
Can you explain how errors are cleared at level 2 and what tools do I need for this?
Can anyone send me the manual to my email: jeremias028hotmailcom, please?
A lot of positive energy for all.
Hello!,
I have a R20-16P still manufactured in 2000. This indicates error code 69, error code 195, brushes.
What should I change?
Can you explain how errors are cleared at level 2 and what tools do I need for this?
Can anyone send me the manual to my email: jeremias028hotmailcom, please?
A lot of positive energy for all.
Hello.
We buy Still RX20-16 ser. Send me too the manual please
Best regards
I am also looking for this manual, would anyone be so kind to send me a copy of the manual as well?
Hy
Can help me, please, with a service manual for Still R 20-16, SN 512046002327 / 2004.
Thanks
Hy
Can help me with a service manual for Still R 20-16, SN 512046002327 / 2004.
Thanks
can u send me manual to my mail
mike v, please, can you send me the manual to my email to eletecva gmail com
Thanks
Hi,
Did you check the speed sensor and the wiring for the hydraulic motor?
Normal you will not get any errors on the display because the main controller and the hydraulic controller do not communicate via CAN line. There is only one wire that send voltages to the main controller to accelerate the hydraulic motor.
Do you know how to make modification on the parameters via display (console)?
Best regards.
Hello.
I need help. I have Still RX20-16 ser. 6012 and I would like to erase insepction service
Please Help
Regards
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.