I have a couple questions about a 1966 H20E 3 wheeler with a Y112 engine.
1. On the floor board, right side, there is a T handle pull cable.
It is associated with the brake system.....
What does it do and how does it work??
2. The hydraulic filter cartridge is Hyster P/N 236090 and
the gasket is 236088.
Can anyone cross the Hyster numbers to a more common brand of replacement cartridge number?
Baldwin? Purolator? Fram?
Thank You!
dk
Showing items 1 - 6 of 6 results.
Yes, that's exactly how it works.
It was awkward when I last tried to reconnect the chain with the FL tipped up on a steep angle with the engine idling in gear to keep the chain as slack as possible...... HA!
It was not slack enough, I couldn't re-connect it but I want to and I need the parking brake functioning.
Maybe that T handle is the key to success with this problem.
I can't remember exactly how that worked. Hydraulic pressure was used. Starting it may cause the chain to get slack and then it goes tight when shut off.
edit, I guess you have to put it in drive too to get the chain slack. The T handle should do it.
Thank you,
There is a small chain under the unit that is supposed to connect to the park brake linkage. It is unhooked.
I am trying to figure out how to get that chain slack enough to re-connect it. Perhaps that handle is the key
That has a automatic parking brake that comes on when the machine is in "park" or not running. If you need to move it, and it won't start, the T handle releases the brake.
Thank you, yes need the gasket......it is leaking a bit...
236090 will cross over to a NAPA filter#1092,might come with the gasket
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.