Hello everyone,
can you please help me with these error codes ?
- 426 D/CONT
- 436 P/CONT
They appear when the forklift warm up.
And another problem that i have is, when i try to get in diagnostic mode (FN1+FN4+key on) the screen is just blank, and the menu is not showing up.
Showing items 1 - 5 of 5 results.
If your truck is equipped with Zapi controllers - the problem is with VCM module.
I have found it. It Was the one of the 3 Fans. If you disconnect the fanconnector you got this error. I have changed all 3 Fans, now its running.
In diagnosismode i saw that the Temperature of the Controllers are normal. Ty for you help
Diagnosis mode isFN1+FN4 turn key then FN2,FN3,FN4, FN1 within ten seconds.
Adjustment mode isFN1+FN3 Turn key then code 3123. Hope this helps
Hey did you find a solution? Have the same Problem. Changed Pumpcontroller but error ist still activ
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.