I'm working on an older H50H with a Hydraulic Monotrol.
Received Lift with bad master cylinder and no forward or reverse.
I have been concentrating on the creep valve because I'm not getting pressure at 2A on the valve body. This is my first step into this transmission so just a little timid.
I was not getting fluid through the Selonoid so I replaced it and still no fluid. If I remove Selonoid entirely I get fluid when the lift starts. I'm getting power to the Selonoid from the ebrake.
Just don't want to chase a ghost......
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.