I'm working on an older H50H with a Hydraulic Monotrol.
Received Lift with bad master cylinder and no forward or reverse.
I have been concentrating on the creep valve because I'm not getting pressure at 2A on the valve body. This is my first step into this transmission so just a little timid.
I was not getting fluid through the Selonoid so I replaced it and still no fluid. If I remove Selonoid entirely I get fluid when the lift starts. I'm getting power to the Selonoid from the ebrake.
Just don't want to chase a ghost......
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.