code 11 replaced foot petal switch code still there step on foot petal machine moves a inch then code -11 any ideas or just replace controller measured voltage under 18v
Showing items 1 - 3 of 3 results.
Possible bad accel pot, and if you replace it, remember to calibrate its
-11 is Accelerator Start Switch On at startup, sounds like either a faulty switch or out of adjustment.
Not sure but is this brake pot fault, or when the voltage is right when switch engages. Without looking at the manual, accelerator pot needs to b at a voltage before the switch engages.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.