1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Alarm 235 on mode 3.0

Discussion:
Alarm 235 on mode 3.0

Tell me the reason for this error please

From Admin..You must use English Language please.
  • Posted 5 May 2024 02:36
  • By Sergey_Malkov
  • joined 5 May'24 - 1 message
  • Russian Federation
Mal
Post a ReplyReport this post
Showing items 1 - 3 of 3 results.
A CPCD25 is a diesel. The code you describe sounds like a code from an electric. In the zapi manual for a dual ace2 it states it to be a hardware fault in the controller. If you confirm the full model (engine or version of electric) I can see what I can find. Below is what I found.
"This alarm occurs when a mismatch is detected between the setpoint for the
overcurrent detection circuit (dependent on parameter DUTY PWM CTRAP, see
paragraph 8.2.6) and the feedback of the actual threshold value.
Troubleshooting
The failure lies in the controller hardware. Replace the logic board."
  • Posted 23 Jul 2024 23:12
  • By David_Friesen
  • joined 20 Jul'23 - 11 messages
  • Ontario, Canada
Post a ReplyReport this post
2,5 Diesel?
  • Posted 23 Jul 2024 06:03
  • By Sunnysmile
  • joined 4 Jul'17 - 12 messages
  • Moscowskaya, Russian Federation
Post a ReplyReport this post
?? 2,5 ??????? , ??????????
  • Posted 23 Jul 2024 06:02
  • By Sunnysmile
  • joined 4 Jul'17 - 12 messages
  • Moscowskaya, Russian Federation
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Nagano NUL120-6
Nagano NUL120-6 2020
Yokohama, Japan
Used - Sale
SMV (Konecranes) 16-1200C
SMV (Konecranes) 16-1200C
Balling, Denmark
New - Sale
|
Upcoming industry events …
Battery Cells & Systems Expo
July 9-10, 2025 - Birmingham, United Kingdom
TOC Americas 2025
October 21-23, 2025 - Panama City, Panama
More Events
Last Week's Most Read
edition #1235 - 19 June 2025
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ
Global Industry News
edition #1236 - 26 June 2025
As June comes to a close, the month when our sector recognises National Forklift Safety Day , the United Kingdom’s Association of Industrial Truck Trainers (AITT) has issued a timely reminder of the need to ensure any staff training is fully accredited... Continue reading
Upcoming industry events …
Battery Cells & Systems Expo
July 9-10, 2025 - Birmingham, United Kingdom
TOC Americas 2025
October 21-23, 2025 - Panama City, Panama
More Events
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution
JLG 1932R
JLG 1932R 2017
Flesherton, Ontario, Canada
Used - Sale
UN Forklift FD35T
UN Forklift FD35T
HANGZHOU, Zhejiang, China
New - Sale
|

Showcased in the Virtual Expo

From the forum discussions …
"Unicarriers - it would have to be for a dual fuel unit also. Usually a bad cam or crankshaft sensor will throw a E-27 or a E-28 code on the dash panel... If it does not light up and the bulb is bad then it will not start also."
mwjago, United States
Read & Post in our Forums
Fact of the week
Sourdough bread contains Lactobacillus reuteri, a probiotic bacteria. During pregnancy and breastfeeding, these bacteria can travel from the mother's colon to her breast tissue and be passed to the infant through breast milk. It offers various health benefits, including potential protection against breast cancer.