code 97 on dash - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
code 97 on dash

I have an active code 87 on Dash. No code listings in our manual. Operation seems normal.

Posted 18 Dec 2020 03:52
By Bart_Simpson
joined 18 Dec'20 - 2 messages
Ontario, Canada

Showing items 1 - 1 of 1 results.

Sort messages by:

87 Faulty signal from
Control lever (S815-
P1) for lifting/lowering.
Signal voltage
under 0.2 V or over
4.8 V.
Lifting/lowering
not working.
Check cabling between
the control unit and the
component with diagnostic
menu.
Check the switch.
D790-1/K7:3
- S815-P1/8
BOOM,
menu 1
7.1.1 Control
lever

Posted 19 Jan 2023 17:54
By giorgos_k
joined 10 May'17 - 40 messages
Makedonia, Greece

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.