Transmission proble - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Transmission proble

Clark GPX25

Model # GPX25
Serial # GPX230-1475-7170
After filling trans axle to the full level on dipstick while warm and running everything is fine until it sits turned off for a few hours oil starts coming out the dipstick through the vent holes Where could the oil be coming from / No external leaks anywhere Input appreciated

Posted 22 May 2018 13:40
By reglift
joined 22 May'18 - 2 messages
Indiana, United States

life is good

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Hello and thanks for the reply I added 4 inches of pipe to the filler neck and it seems to have fixed the problem Will the air work its way out after a while
Thanks

Posted 25 May 2018 04:25
By reglift
joined 22 May'18 - 2 messages
Indiana, United States

Post a Reply Report this post

You may have some aeration after changing oil. If the condition persists Clark has recommended extending the vent tube about 2 inches when experiencing this.

Posted 23 May 2018 23:41
By tom_p
joined 21 Feb'11 - 198 messages
Alberta, Canada

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.