what is the error code as this file for error codes will not send threw email its about 2000 pages
Redbull,
I would like to ask your help. Can you please give me a list of fault codes meanings for N177 hyster forklift please. My email address is [email address removed]
Hope this message reach you.
Thanks,
redbull,
put this job to bed yesterday , with all the info you sent the forklift is up and running , thanks for your help
regards peter
redbull
thanks for all info , we have not been back to site yet, but I will keep you informed
regards peter
how did you go with info I sent you
redbull
I thave sent my email address but it looks like its has been removed from the post by forkliftaction , check out our website beech forklifts limited in Lancashire england for email address , I would really like the info please, thanks peter
redbull
[email address removed], thanks redbull
regards peter
have u got a email I will send calibration pdf
redbull
firstly thanks for replying , the problem was the lift/lower function was not working correctly , the mast just carried on lifting to max hight every time it was used so we changed the joystick , now with the new joystick it will not function at all, when we arrived at the customers site the truck alternator had shorted out ,not sure if this is relevant ,we have had the truck running. regards peter
brewski
you are as we say in the UK a top guy , you always reply to my posts
regards peter
does the E hydraulics work after replacing mini lever
If you cannot see hydraulic calibrations, you either have the wrong CDF installed or you do not have a service level password for the display. If you have a supervisor level password you cannot do calibrations.